Sony CMT-SE9 사용자 설명서

다운로드
페이지 112
44
GB
To record using the Group 
Function
Press MD GROUP on the remote repeatedly 
until “GROUP ON” appears after step 2. Press 
GROUP SKIP on the remote repeatedly until 
“New Group” or the desired group appears after 
step 5.
To record only your favorite CD 
tracks
You can record only your favorite CD tracks
using the Program Play. Between steps 2 and 3, 
perform steps 1 to 5 of “Creating your own 
program” (page 21).
Notes 
• You cannot use this recording function with DVDs.
• The MD deck performs analog recording for VIDEO 
CDs, Super Audio CDs (except the CD layer) and 
discs with MP3 audio tracks. Also, when “T.Mark 
Lsync” is selected for Level Synchro Recording 
(page 47), more track marks may be marked than the 
actual number of tracks.
• You cannot pause the recording.
• If the MD play mode is set to the Repeat Play or 
Shuffle Play, the play mode switches to Normal Play 
in step 5.
• Playback with PBC function of VIDEO CD is 
automatically cancelled.
• The following items are either inoperative or cannot 
be used during recording a CD or CD layer part of 
Super Audio CD in CD-MD Synchro Recording:
– The Auto Cut Function
– The Track Mark Function
• The tracks are recorded with a recording level of 
0.0 dB regardless of the recording level value set in 
the Setup Menu.
Tips
• For details about LP2/LP4 recording, see “Recording 
• Depending on the disc, CD-TEXT information may 
also be recorded.
You can make an analog recording of a tape on 
an MD. You can use TYPE I (normal) tape.
Use buttons on the MD deck for the operation.
1
Load a recordable MD.
2
Load a tape you want to record.
3
Press MODE repeatedly until 
“TAPE
t
MD SYNC” appears.
4
Press ENTER/START.
“Press START” flashes.
The MD deck stands by for recording and 
the tape deck pauses for play.
* When playing back both sides or the front side, 
N
 appears. When playing back the reverse 
side, 
n
 appears. To play the side opposite the 
display, move the TAPE lever to x, eject and 
re-insert the tape with the sides reversed, and 
then perform the procedure again from step 3.
5
Press DIRECTION repeatedly until 
g
” appears to record on one side or 
h
” (or “
j
”) to record on both 
sides.
6
Press ENTER/START while “Press 
START” flashes.
Recording starts.
When the recording is completed, the tape 
deck and the MD deck stop automatically.
To stop recording
Move MD lever to x.
Recording a tape on an 
MD
— TAPE-MD Synchro Recording
Tape playback side
*