Sony dvp-ns9100es 사용자 설명서
86
, The equipment connected to the HDMI
OUT jack does not conform to the audio
signal format, in this case set
“AUDIO(HDMI)” in “AUDIO SETUP” to
“PCM” (page 81).
signal format, in this case set
“AUDIO(HDMI)” in “AUDIO SETUP” to
“PCM” (page 81).
, Set “AUDIO DRC” to “STANDARD”
(page 80).
No sound is output from the HDMI OUT
jack
jack
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
signals).
, The HDMI OUT jack does not output Super
Audio CD sound.
, The VIDEO OFF function is set to on.
, Set “AUDIO (HDMI)” in “AUDIO
, Set “AUDIO (HDMI)” in “AUDIO
SETUP” to “PCM” (page 81).
, When the i.LINK indicator lights up, audio
signals are output only from the i.LINK
S200 (AUDIO) jack.
S200 (AUDIO) jack.
Sound distortion occurs.
, Set “AUDIO ATT” in “AUDIO SETUP” to
“ON” (page 80).
The volume is low.
, Set “AUDIO ATT” in “AUDIO SETUP” to
“OFF” (page 80).
The surround effect is difficult to hear
when playing a Dolby Digital, or DTS
sound track.
when playing a Dolby Digital, or DTS
sound track.
, Check the speaker connections and settings
, 5.1 channel sound is not recorded on the
disc being played.
The sound only comes from the centre
speaker.
speaker.
, Depending on the disc, the sound may come
from the centre speaker only.
The settings of “SPEAKER SETUP” are not
usable.
usable.
, The settings are not usable when you use the
i.LINK connection.
Operation
The remote does not function.
, The batteries in the remote are weak.
, There are obstacles between the remote and
the player.
, The distance between the remote and the
player is too far.
, The remote is not pointed at the remote
sensor on the player.
, The COMMAND MODE switch setting on
the remote does not match the setting on the
player (page 16).
player (page 16).
The disc does not play.
, The disc is skewed.
, The player cannot play certain discs (page
, The player cannot play certain discs (page
6).
, The region code on the DVD does not match
the player.
, Moisture has condensed inside the player
(page 3).
, The player cannot play a recorded disc that
is not correctly finalized (page 7).
The MP3 audio track cannot be played
(page 61).
(page 61).
, The DATA CD is not recorded in an MP3
format that conforms to ISO9660 Level 1/
Level 2 or Joliet.
Level 2 or Joliet.
, The MP3 audio track does not have the
extension “.MP3.”
,
The sampling frequencies of MP3 files are
other than 44.1 kHz and 48 kHz.
other than 44.1 kHz and 48 kHz.
, The data is not formatted in MP3 even
though it has the extension “.MP3.”
, The data is not MPEG1 Audio Layer 3 data.
, The player cannot play audio tracks in
, The player cannot play audio tracks in
MP3PRO format.
The JPEG image file cannot be played
(page 61).
(page 61).
, The DATA CD is not recorded in a JPEG
format that conforms to ISO 9660 Level 1/
Level 2, or Joliet.
Level 2, or Joliet.
, The file has an extension other than
“.JPEG” or “.JPG.”
, The image is larger than 5760 (width)
×
3840 (height) in normal mode, or more than
8 M pixels in progressive JPEG. (Some
progressive JPEG files cannot be displayed
even if the file size is within this specified
capacity.)
8 M pixels in progressive JPEG. (Some
progressive JPEG files cannot be displayed
even if the file size is within this specified
capacity.)
, The image does not fit the screen (the image
is reduced).
, “MODE (MP3, JPEG)” is set to “AUDIO
(MP3)” (page 65).