Sony DVP-NC85H 사용자 설명서

F:\SONY DVD\2666954112 DVP-
NC85H_US\SOURCE\DVP-
NC85H_US\01US13ADV4-CEK.fm

master page=left

DVP-NC85H

2-666-954-11(1)

◆ DOLBY DIGITAL (DVD VIDEO/DVD-VR 
mode only)
Selects the type of Dolby Digital signal.

If the HDMI OUT jack is connected to equipment 
not compatible with DOLBY DIGITAL signals, the 
“D-PCM” signals will be automatically output even 
when you select “DOLBY DIGITAL.”

◆ DTS
Select the type of DTS audio signals.

If the HDMI OUT jack is connected to equipment 
not compatible with DTS signals, the “OFF” signals 
will be automatically output even when you select 
“ON.”

◆ 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio 
signal.

• The analogue audio signals from the LINE OUT 

L/R (AUDIO) jacks are not affected by this 
setting and keep their original sampling frequency 
level.

• If the HDMI OUT jack is connected to equipment 

not compatible with 96 kHz/24 bit signals, 
48 kHz/16 bit PCM will be automatically output 
even when you select “96kHz/24bit.”

D-PCM

Select this when the player is 
connected to an audio 
component without a built-in 
Dolby Digital decoder. You can 
select whether the signals 
conform to Dolby Surround 
(Pro Logic) or not by making 
adjustments to the 
“DOWNMIX” item in 
“AUDIO SETUP” (page 69).

DOLBY 
DIGITAL

Select this when the player is 
connected to an audio 
component with a built-in 
Dolby Digital decoder.

OFF

Select this when the player is 
connected to an audio 
component without a built-in 
DTS decoder.

ON

Select this when the player is 
connected to an audio 
component with a built-in DTS 
decoder.

48kHz/16bit

The audio signals of DVD 
VIDEOs are always converted 
to 48kHz/16bit.

96kHz/24bit

All types of signals including 
96kHz/24bit are output in their 
original format. However, if the 
signal is encrypted for 
copyright protection purposes, 
the signal is only output as 
48kHz/16bit.