Sony dvp-ns39 사용자 설명서

• When playing in DVD-VR mode: If you connect 

to an audio component using the DIGITAL OUT 
(COAXIAL) jack and want to switch between the 
sound tracks, set “DOLBY DIGITAL” to “D-
PCM” in “AUDIO SETUP” (page 54).

You can check the audio signal format by 
pressing 

 (audio) repeatedly during 

playback. The format of the current audio 
signal (Dolby Digital, DTS, PCM, etc.) 
appears as shown below.

◆ When playing a DVD VIDEO

Dolby Digital 5.1 ch

◆ When playing a DivX video file on a DATA 
CD or a DATA DVD

MP3 audio

Audio signals recorded in a disc contain the 
sound elements (channels) shown below. 
Each channel is output from a separate 
speaker.
• Front (L)
• Front (R)
• Centre
• Rear  (L)
• Rear  (R)
• Rear (Monaural): This signal can be either 

the Dolby Surround Sound processed 
signals or the Dolby Digital sound’s 
monaural rear audio signals.

• LFE (Low Frequency Effect) signal

• If “DTS” in “AUDIO SETUP” is set to “OFF,” 

the DTS track selection option will not appear on 
the screen even if the disc contains DTS tracks 
(page 54).

• MPEG audio signals with more than two channels 

will appear as shown above (3/2.1, 2/1), but only 
the Front (L) and Front (R) signals will be output 
from your two front speakers.

1:ENGLISH DOLBY DIGITAL

3 / 2 .1

Rear (L/R)

Front (L/R) 
+ Centre

LFE (Low Frequency 
Effect)

1: 

MP3     128k

Bit rate