Sony dvp-ns39 사용자 설명서

When you connect a stereo TV or 2 front 
speakers, TVS (TV Virtual Surround) lets 
you enjoy surround sound effects by using 
sound imaging to create virtual rear speakers 
from the sound of the front speakers (L: left, 
R: right) without using actual rear speakers. 
TVS was developed by Sony to produce 
surround sound for home use using just a 
stereo TV.
If the player is set up to output the signal from 
the DIGITAL OUT (COAXIAL) jack, the 
surround effect will only be heard when 
“DOLBY DIGITAL” is set to “D-PCM” and 
“MPEG” is set to “PCM” in “AUDIO 
SETUP” (page 54).

The following display appears.

See the explanations given for each item 
in the following section.
• TVS DYNAMIC THEATER
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD

Select “OFF” in step 2.

◆ TVS DYNAMIC THEATER, TVS DYNAMIC, 
TVS WIDE
This mode is effective when the distance 
between the front L and R speakers is short, 
such as with built-in speakers on a stereo TV.

◆ TVS NIGHT
This feature is useful when you want to hear 
the dialogue and enjoy the surround sound 
effects of “TVS WIDE” at low volume.

◆ TVS STANDARD
Use this setting when you want to use TVS 
with 2 separate speakers.

• When the playing signal does not contain a signal 

for the rear speakers, you cannot hear the 
surround effects.

• When you select one of the TVS modes, turn off 

the surround setting of the connected TV or audio 
component.

• Make sure that your listening position is between 

and at an equal distance from your speakers, and 
that the speakers are located in similar 
surroundings.

• Not all discs will respond to the “TVS NIGHT” 

function in the same way.

• The TVS effects do not work when using the Fast 

Play or Slow Play functions, even though you can 
change the TVS modes.

SUR

TVS DYNAMIC THEATER