Sony har-lh500 사용자 설명서
16
Recording tips (continued)
Erasing blank portions
automatically
(Smart Space/Auto Cut)
automatically
(Smart Space/Auto Cut)
The Smart Space function lets you make the
blank spaces between tracks 3 second long
automatically. If the Smart Space function is
on and there is no sound input for about 3
seconds or more (but less than 30 seconds)
during recording, the recorder replaces this
silence with a blank of about 3 seconds and
continues recording:
blank spaces between tracks 3 second long
automatically. If the Smart Space function is
on and there is no sound input for about 3
seconds or more (but less than 30 seconds)
during recording, the recorder replaces this
silence with a blank of about 3 seconds and
continues recording:
Auto Cut
: When the Smart Space function is
on, if there is no sound input for 30 seconds or
more, the recorder replaces this silence with a
blank of about 3 seconds and enters recording
pause.
more, the recorder replaces this silence with a
blank of about 3 seconds and enters recording
pause.
1
While the recorder is stopped or
recording pause, press MENU/NO.
recording pause, press MENU/NO.
“Setup Menu” appears in the display.
2
Press
<
/
,
repeatedly until
“SmartSpace On” (or
“SmartSpace Off”) appears in the
display, then press ENTER or YES.
“SmartSpace Off”) appears in the
display, then press ENTER or YES.
No sound input for 30 seconds or more
Off
Replaced with a blank of 3 seconds and
recording pauses
recording pauses
On
No sound input for less than 30 seconds
Off
Replaced with a blank of 3 seconds and
recording continues
recording continues
On
To change the trigger level for Level
Synchro Recording
Do the procedure below to change the signal
level that triggers Level Synchro Recording.
level that triggers Level Synchro Recording.
1
While the recorder is stopped or
recording pause, press MENU/NO.
recording pause, press MENU/NO.
“Setup Menu” appears in the display.
2
Press
<
/
,
repeatedly until
“L.Sync(T) –XXdB” appears in the
display, then press ENTER or YES.
display, then press ENTER or YES.
3
Press
<
/
,
repeatedly to select the
level, then press ENTER or YES.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB increments
(–50 dB is the factory setting).
–72 dB and 0 dB, in 2 dB increments
(–50 dB is the factory setting).
4
Press MENU/NO.
To restore the factory setting
Press CLEAR while setting the trigger level in
step 3.
step 3.
Notes
• If this function is activated when the 400th track is
reached, recording stop.
• When recording from a CD, a track number might
not be marked for tracks less than 4 seconds in
length.
length.
• Level Synchro Recording (“Tr.Mark Lsync” or
“Tr.Mark Off”) and input level settings remain even
after you turn off the power to the recorder or
disconnect it from the power outlet.
after you turn off the power to the recorder or
disconnect it from the power outlet.
Tip
You can mark track numbers even after recording has
finished (see “Dividing recorded tracks” on page 25).
finished (see “Dividing recorded tracks” on page 25).