Sony har-lh500 사용자 설명서
Recording to HDD
17
5
Press
<
/
,
repeatedly until
“Analog X.XdB” appears in the display,
then press ENTER or YES.
then press ENTER or YES.
6
While monitoring the sound, press
<
/
,
repeatedly to adjust the recording
level so that the OVER indicator on the
peak level meters does not turn on.
peak level meters does not turn on.
H D A n a l o g + 1 . 5 d B
7
Press ENTER or YES.
8
Press MENU/NO.
9
Stop playing the sound source.
10
Do steps 5 and 6 of “Recording to the
HDD” on page 13.
HDD” on page 13.
To restore the factory setting
Press CLEAR while adjusting the recording
level in step 6.
level in step 6.
Note
The recording level can only be increased up to +12
dB (0.0 dB is the factory setting). Therefore, if the
output level of the connected components is low, it
may not be possible to set the recording level to
maximum.
dB (0.0 dB is the factory setting). Therefore, if the
output level of the connected components is low, it
may not be possible to set the recording level to
maximum.
Tip
You can adjust the recording level by pressing the
REC LEVEL +/– buttons repeatedly during recording
or recording pause. The display returns to its former
condition after a few seconds.
REC LEVEL +/– buttons repeatedly during recording
or recording pause. The display returns to its former
condition after a few seconds.
Avoid turning on this indicator
3
Press
<
/
,
repeatedly to select the
setting, then press ENTER or YES.
To
Select
Turn on the Smart Space
and Auto Cut functions
and Auto Cut functions
SmartSpace On
(factory setting)
(factory setting)
Turn off the Smart Space
and Auto Cut functions
and Auto Cut functions
SmartSpace Off
4
Press MENU/NO.
Notes
• When you record from a CD, Smart Space does not
affect the order of the track numbers being
recorded, even if the blank space occurs in the
middle of a track.
recorded, even if the blank space occurs in the
middle of a track.
• Auto Cut is automatically turned on or off in
tandem with Smart Space.
• If the recorder continues recording pause for about
10 minutes after Auto Cut activated, recording stops
automatically.
automatically.
• Smart Space and Auto Cut (“SmartSpace On” or
“SmartSpace Off”) settings remains even after you
turn off the power to the recorder or disconnect it
from the power outlet.
turn off the power to the recorder or disconnect it
from the power outlet.
• If this function is activated when the 400th track is
reached, recording stop.
Adjusting the recording level
You can adjust the recording level for analog
recording.
recording.
1
Do steps 1 through 3 of “Recording to
the HDD” on page 13 and press
ANALOG in step 3.
the HDD” on page 13 and press
ANALOG in step 3.
2
Press
z
.
3
Play the portion of the sound source
with the strongest output.
with the strongest output.
4
Press MENU/NO.
“Setup Menu” appears in the display.