Sony MDS-E10 사용자 설명서

55

This chapter explains simple ways to name
a track or MD using an optional keyboard,
as well as how to operate the MD recorder
directly through the keyboard.

You can use any IBM*-compatible keyboard with a PS/2
interface**. You can select a keyboard with either an
English or Japanese key layout. When you use a keyboard
with a different layout, you will have to assign characters
to the keys. For details, see “Assigning Characters to
Keyboard Keys” on page 58.

*

IBM is a trademark of International Business Machines Corporation.

** Note

Some keyboards may not work normally if they draw excessive
electrical current. Please use keyboards with a draw of 120mA or less .

*

Please turn off the power before connecting the keyboard to the recorder.
Connecting the keyboard with the recorder power on can result in
malfunctions.

The first time you connect a keyboard, you must select the
keyboard type.

While the recorder is stopped, press MENU/NO
twice.
“Setup Menu” appears in the display.

Turn AMS (or press ./> repeatedly) until
“Keyboard” appears in the display; press AMS or
YES.

Turn AMS (or press ./> repeatedly) until
“Type” appears in the display; press AMS or YES.

Turn AMS (or press ./> repeatedly) to select
the setting; press AMS or YES.

English keyboard layout

US (factory setting*)

Japanes keyboard layout

JP

10-keyboard layout

10 Key

* In step 4, pressing CLEAR before AMS or YES will reset the factory

settings.