Sony MDS-E10 사용자 설명서
56
Operating the MD Recor
der Using a Keyboar
d
Naming a Track or MD Using
the Keyboard
the Keyboard
You can easily enter or edit names.
Short cut to the naming procedure
1
To give a name to a track or MD, do the following.
• To name a track
Press Num Lock while the desired track number is
displayed and the recorder is stopped, playing,
paused or recording.
displayed and the recorder is stopped, playing,
paused or recording.
• To name a MD
Press Num Lock when no track number is displayed
and the recorder is stopped.
and the recorder is stopped.
A flashing cursor appears in the display, and the
characters can be entered.
characters can be entered.
2
Enter the name
For more on editing during entry, refer to the chart
below.
For more on editing during entry, refer to the chart
below.
3
Press the Enter key or Num Lock key
The disc or track name is displayed from its beginning.
The disc or track name is displayed from its beginning.
Operations you may wish to do while naming a
track or MD
track or MD
To
Press
Cancel the operation
[Esc]
Switch between uppercase and
[Caps Lock] (or hold
lowercase letters
down [Shift]* while
entering letters for
uppercase)
entering letters for
uppercase)
Move the cursor
[
←
] or [
→
]
Erase the character at the cursor
[Delete]
position
Erase the character preceding
Erase the character preceding
[Back Space]
the cursor
*
If you have assigned characters to keys using [Shift] (see page 58), the
characters you assigned have priority.
characters you assigned have priority.
z
Undoing the naming of a track or MD
1 Press [F11]
“Name Undo?” appears.
2 Press [Enter].
Press [Esc] to cancel the operation.
Using the Edit Menu
1
Do the following to name a track or MD.
• To name a track or MD
Press [Esc] while the recorder is stopped, playing or
paused.
paused.
• To name a track during recording.
Press [Esc} during recording.
“Edit Menu” appears in the display.
2
Press [
↑
]/[
↓
] or [Tab]/[Shift]+[Tab] repeatedly until
“Name?” appears, then press [Enter].
While the recorder is recording, a flashing cursor
appears in the display, and you can enter a name for
the track being recorded. In this case, please go to step
5.
While the recorder is recording, a flashing cursor
appears in the display, and you can enter a name for
the track being recorded. In this case, please go to step
5.
3
Press [
↑
]/[
↓
] or [Tab]/[Shift]+[Tab] repeatedly until
“Nm In?” appears, then press [Enter].
4
Press [
↑
]/[
↓
] or [Tab]/[Shift]+[Tab] repeatedly until
the track number (when naming a track) appears or
“Disc” (when naming the MD) flashes, then press
[Enter].
Characters can be entered.
“Disc” (when naming the MD) flashes, then press
[Enter].
Characters can be entered.
5
Enter the name.
6
Press [Enter] or [Num Lock].
“Complete!” appears for a few seconds, and the
naming is completed.
“Complete!” appears for a few seconds, and the
naming is completed.