Sony MDS-JE470 사용자 설명서
Pla
y
ing M
D
s
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
U2.fm]
23
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
masterpage:Left
(3 column)
3
Turn AMS (or press
./>
repeatedly) until “Setup?” appears,
then press AMS or YES.
then press AMS or YES.
4
Turn AMS (or press
./>
repeatedly) until “Program?” appears,
then press AMS or YES.
then press AMS or YES.
5
Turn AMS (or press
./>
repeatedly) until the track number you
want to add to the program appears,
then press AMS or
want to add to the program appears,
then press AMS or
M
(or use the
number button(s) on the remote to enter
the track directly).
the track directly).
If you entered the wrong track number
Press m
/
M repeatedly until the wrong
track number flashes, then do step 5 above
again or press CLEAR to erase the track
number. If “0” flashes, press m so that the
last track number flashes, then enter a
correct number.
again or press CLEAR to erase the track
number. If “0” flashes, press m so that the
last track number flashes, then enter a
correct number.
To enter a track number over 10
Use >10. For details, see page 21.
6
Repeat step 5 to enter other tracks.
The entered track is added to the location
where the “0” flashes.
Each time you enter a track, the total
program time appears in the display.
where the “0” flashes.
Each time you enter a track, the total
program time appears in the display.
7
Press YES.
“Complete!” appears and the program is
completed.
completed.
8
Press
H
.
Program Play starts.
To stop Program Play
Press x.
Notes
•
If you eject the MD, the program will be lost.
•
The display shows “- - - . - -” when the total playing
time of the program exceeds 999 minutes.
time of the program exceeds 999 minutes.
•
If you press GROUP ON/OFF to turn on or off the
Group function, the program will be lost (MDS-
JE770 only).
Group function, the program will be lost (MDS-
JE770 only).
Checking the order of the program
While the deck is stopped and “PGM”
lights up, press LEVEL/DISPLAY/CHAR (or
DISPLAY) repeatedly.
lights up, press LEVEL/DISPLAY/CHAR (or
DISPLAY) repeatedly.
The first several tracks in the program appear in
the display. To see the rest of the program, turn
AMS (or press > repeatedly).
the display. To see the rest of the program, turn
AMS (or press > repeatedly).
Changing the contents of the
program
While the deck is stopped and “PGM” lights up,
do steps 2 to 4, followed by one of the
procedures below:
do steps 2 to 4, followed by one of the
procedures below:
To
Do the following:
Erase a track
Press m
/
M repeatedly
until the number of the
unwanted track flashes, then
press CLEAR.
unwanted track flashes, then
press CLEAR.
Erase all tracks
Press down CLEAR until all
the track numbers disappear.
the track numbers disappear.
Add a track at the
beginning of the
program
beginning of the
program
Add a track in the
middle of the program
middle of the program
Press m
/
M repeatedly
until the track number which
will precede the new track
flashes. Press AMS to
display flashing “0,” then do
steps 5 to 7.
will precede the new track
flashes. Press AMS to
display flashing “0,” then do
steps 5 to 7.
Add a track to the end
of the program
of the program
Replace a track
Press m
/
M repeatedly