Sony NT-2 사용자 설명서
44
• The cassette tape cannot be ejected.
nThe power source is
disconnected while operating.
Connect the power source, press
p , and slide the EJECT switch
upward.
Connect the power source, press
p , and slide the EJECT switch
upward.
• The BASS BOOST feature does not
function.
nA cord is connected to the LINE
OUT jack.
Remove the cord.
Remove the cord.
• Recording cannot be done.
nConnection is incorrect.
nRecording level is set at
nRecording level is set at
minimum (while manual
recording).
recording).
nThe cassette is record-protected.
(The red tab on the cassette tape
is pushed down.)
Push the white tab on the
opposite side of the cassette with
a pointed object. When the red
tab is visible on the side you
want to record on, recording can
be done.
is pushed down.)
Push the white tab on the
opposite side of the cassette with
a pointed object. When the red
tab is visible on the side you
want to record on, recording can
be done.
• Sound is not heard at all.
nConnection is incorrect.
nThe volume is set at minimum.
nThe volume is set at minimum.
Adjust the volume pressing the
+ (volume) button.
+ (volume) button.
• Cannot increase the volume.
nThe AVLS function is activated.
Slide the AVLS switch to OFF.
• Increase of noise or deterioration of
sound.
nThe recorder is placed near noise
sources such as a TV set.
Place the recorder away from
noise sources.
Place the recorder away from
noise sources.
nThe tape head is not clean.
Clean the head using the
cleaning cassette NTC-10CL.
cleaning cassette NTC-10CL.
• The clock does not keep good time.
nThe lithium battery is weak.
Replace it with a new one.
• Correct date and time are not
recorded on the tape.
nThe date and time have not been
set.
Set the date and time.
Set the date and time.
Printed in Japan