Sony STR-LV700R 사용자 설명서
masterpage:Left
filename[E:\SONY\STRLV700R_2nd\4249847121GB\4249847121\4249847121STRLV700RCEL
\01GB07_STR-LV700-CEL.fm]
\01GB07_STR-LV700-CEL.fm]
38
GB
model name1[STR-LV700R]
[4-249-847-12(1)]
Manual tuning
You can tune in stations in 50 kHz steps for the
FM band and 9 kHz steps for the AM band.
FM band and 9 kHz steps for the AM band.
1
Press the
FM
or
AM
button repeatedly
to select the FM or AM band.
You can also use INPUT SELECTOR on
the system. The last station received is
tuned in.
the system. The last station received is
tuned in.
2
Press the
TUNING MODE
button
repeatedly to select
MANUAL T.
.
3
Press the
TUNING +
or
TUNING –
button repeatedly to tune in the station
that you want.
that you want.
Press the TUNING + button to change the
frequency from low to high.
frequency from low to high.
Press the TUNING – button to change the
frequency from high to low.
frequency from high to low.
Tip
If STEREO flashes on the display and the FM stereo
reception is poor, press the FM MODE button to
improve the sound. You will not be able to enjoy the
stereo effect, but the sound will be less distorted.
reception is poor, press the FM MODE button to
improve the sound. You will not be able to enjoy the
stereo effect, but the sound will be less distorted.
Note
If STEREO does not appear at all when an FM
broadcast is received normally, press the FM MODE
button to display the STEREO indication.
broadcast is received normally, press the FM MODE
button to display the STEREO indication.
Preset tuning
After you have tuned in stations using automatic
tuning or manual tuning, you can preset them to
the receiver. You can then tune in any of the
preset stations directly. Up to 30 FM or AM
stations can be preset. The receiver also scans all
the stations that you have preset.
Before tuning in preset stations, be sure to preset
them by performing “Presetting radio stations”.
tuning or manual tuning, you can preset them to
the receiver. You can then tune in any of the
preset stations directly. Up to 30 FM or AM
stations can be preset. The receiver also scans all
the stations that you have preset.
Before tuning in preset stations, be sure to preset
them by performing “Presetting radio stations”.
Presetting radio stations
1
Press the
FM
or
AM
button repeatedly
to select the FM or AM band.
You can also use INPUT SELECTOR on
the system. The last station received is
tuned in.
the system. The last station received is
tuned in.
2
3
Press the
MEMORY
button.
MEMORY appears on the display for a few
seconds.
seconds.
4
Press the
SHIFT
button to select the
memory page and press the
PRESET
CH/ALBUM +
or
PRESET CH/
ALBUM –
button to select a preset
number.
If MEMORY disappears before you press
the preset number, return to step 3.
the preset number, return to step 3.
5
Press the
MEMORY
button again to
store the station.
If MEMORY disappears before you can
store the station, return to step 3.
store the station, return to step 3.
6
Repeat steps 2 to 5 to preset another
station.
station.
Tuning in preset stations
1
Press the
FM
or
AM
button repeatedly
to select the FM or AM band.
You can also use INPUT SELECTOR on
the system. The last station received is
tuned in.
the system. The last station received is
tuned in.
2
Press the
PRESET CH/ALBUM +
or
PRESET CH/ALBUM –
button
repeatedly to select the preset station
that you want.
that you want.
Each time that you press the button, the
receiver tunes in one preset station at a time,
in the corresponding order and direction as
follows:
receiver tunes in one preset station at a time,
in the corresponding order and direction as
follows:
Tips
• In step 2, press the SHIFT button to select a memory
page (A, B, or C).
• You can also use the PRESET TUNING +/– buttons
on the receiver to tune in preset stations.
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T