Denon dvd-a1udci dz10-077 서비스 매뉴얼

다운로드
페이지 4
METHOD OF UPDATE by CD-R with firmware 
 We will supply the following program files for updating the subject models. 
Therefore, please record each program file on a blank CD-R separately, and 
update the unit upon claim. 
 
 
 
 
Note: Upon recording the Disc:   
a) When recording the supplied file on the blank CD-R, the format shall be 
"ISO9660" and the session shall be "CLOSE".  
b) When recording the supplied file on the disc, please use the lowest recording 
speed that is available on your PC. If the file is recorded at a higher speed, the 
rewriting operation may fail due to improperly recorded data on the disc. 
 
Rewriting procedures of the SYSTEM ROM
.  
(1)  Download the "4010_SYS.ROM" firmware in SDI.  
(2)  Please make "DM_FM_UP" folder on PC.  
(3)  Please insert the " 4010_SYS.ROM " firmware into "DM_FM_UP" folder. 
 
 
 
(4)  Please burn the CD-R by at once mode.  
(5)  Turn the Power Supply of the unit on. Press the "OPEN/CLOSE" button and 
open the Disc Tray.  
(6)  Put the recorded CD-R on the Disc Tray and press the buttons on the remote 
control in the order of "7", "9", "2" and "ENTER".  
(7)  The Disc Tray will close automatically.  
(8)  The FL Display indicates progress of updating. Time necessary for update: 
approximately 5 min.  
(9)  The unit turns off and turns on, and then "NO DISC" is indicated.  
(10)  The new firmware is installed completely.  
(11)  Press the "OPEN/CLOSE" button and open the Disc Tray.  
______________________________________________________________________________________ 
CONFIDENTIALITY NOTICE: 
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their 
employees.  This document may contain information that is privileged, confidential and may be protected from disclosure under 
applicable laws and terms of the DENON Service Agreement.  Any distribution, disclosure, dissemination or copying of this 
document and the information it contains is prohibited.  No responsibility will be accepted by DENON for any damage, injury or loss 
resulting from the misuse of the information contained in this document. 
(12)  When "HD" indicator does not light on FL Display, Please go to the next 
STEP #(13). When "HD" indicator lights on FL Display, Please go to (6) and 
update again.