Denon dvd-a1udci dz10-077 서비스 매뉴얼

다운로드
페이지 4
(3)  Please confirm! "NO DISC" on the FL Display.  
(4)  While pushing the "PLAY" and "OPEN/CLOSE" button, turn on the power of 
unit.   
(5)  Plug in AC CORD.  
(6)  The indication of "PLAY" and "PAUSE" will be displayed on FL Display.  
(7)  Please confirm! "NO DISC" on the FL Display, and wait 10 seconds.  
(8)  Press the buttons on the remote control in the order of "3", "2", "6" and "5". 
(9)  The version of the firmware will be indicated on the FL Display.  
(10)  The firmware list will also be shown on connected TV (GUI).  
(11)  Push the "UP" button of cursor button, version of the each firmware will be 
indicated on the FL Display. 
 
The version of new firmware 
 
 
 
 
Serial Number Range: 
Please apply the above modification to the models in the following serial 
numbers. (Full Digits) 
 
***1500001 ~ ***1510159 
______________________________________________________________________________________ 
CONFIDENTIALITY NOTICE: 
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their 
employees.  This document may contain information that is privileged, confidential and may be protected from disclosure under 
applicable laws and terms of the DENON Service Agreement.  Any distribution, disclosure, dissemination or copying of this 
document and the information it contains is prohibited.  No responsibility will be accepted by DENON for any damage, injury or loss 
resulting from the misuse of the information contained in this document.