Panasonic kx-p8410 사용자 설명서
54
Usage=xx%
Outline for Menus
Test Page
Prints general information on printer settings and configuration.
Color Calibration
Adjusts the toner density for each color independently or all the colors.
■
Calibration Offset
Adjusts the density for all the colors (CYAN, MAGENTA, YELLOW and BLACK).
Setting a higher number provides darker colors and setting a lower number
provides lighter colors.
Adjusts the density for all the colors (CYAN, MAGENTA, YELLOW and BLACK).
Setting a higher number provides darker colors and setting a lower number
provides lighter colors.
■
CYAN / MAGENTA / YELLOW / BLACK
Adjusts the density for each color independently. Setting a higher number provides
darker color and setting a lower number provides lighter color.
Adjusts the density for each color independently. Setting a higher number provides
darker color and setting a lower number provides lighter color.
■
Calibration Test Print
Prints a Color Calibration Page with the current density settings.
Prints a Color Calibration Page with the current density settings.
■
Reset Calibration
Setting YES resets the current settings back to the default settings.
Setting YES resets the current settings back to the default settings.
Note:
B
The color density setting affects the average life of toner.
System Setting
Configures the printer.
■
Energy Star
If Energy Star is enabled, the printer enters the Energy Star mode when the printer
is idle for 30 minutes.
If Energy Star is enabled, the printer enters the Energy Star mode when the printer
is idle for 30 minutes.
■
Auto Continue
With the Auto Continue set to ON, the printer automatically recovers from the
following error conditions if no recovery operation is done for 10 seconds.
With the Auto Continue set to ON, the printer automatically recovers from the
following error conditions if no recovery operation is done for 10 seconds.
B
Memory Overflow
B
SCSI communication error
■
Data Timeout
With the Data Timeout set to ON, the printer automatically returns to Ready status if
the printer does not receive any data from a computer within the time period set in
this selection (30 to 240 seconds).
With the Data Timeout set to ON, the printer automatically returns to Ready status if
the printer does not receive any data from a computer within the time period set in
this selection (30 to 240 seconds).
Using the Printer
xxxxxx
Usage=xx%
Usage=xx%
Usage=xx%
Page Count
Imaging Unit
Transfer Unit
Fuser Unit
Oil Roll
Maintenance
Item Menu
Selection 2 Menu
Selection 1 Menu
Main Menu