Panasonic kx-tcd340 사용자 설명서
Answering System Features
57
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Note:
L
When the message recording time is set
to “Greeting Only”:
– d and “--” are displayed on the base
to “Greeting Only”:
– d and “--” are displayed on the base
unit
– d is displayed on the handset while the
answering system is turned on
Turning call screening on/off
While a caller is leaving a message, you can
screen the call through the speaker of the
base unit and the handset.
screen the call through the speaker of the
base unit and the handset.
1
Press $ (middle soft key).
2
Select u, then press ,.
3
Select “Settings”, then press ,.
4
Select “Call Screening”, then press
,
,
.
5
Select “On” or “Off”, then press ,.
6
Press {ih}.
Turning message alert on/off
This feature alerts you when new messages
have been recorded. The base unit beeps
about once a minute until you have listened
to all new messages.
have been recorded. The base unit beeps
about once a minute until you have listened
to all new messages.
1
Press $ (middle soft key).
2
Select u, then press ,.
3
Select “Settings”, then press ,.
4
Select “New Msg. Alert”, then press
,
,
.
5
Select “On” or “Off”, then press ,.
6
Press {ih}.
Note:
L
If the base unit is in night mode, the base
unit will not beep when new messages are
recorded.
unit will not beep when new messages are
recorded.
TCD340E(e).book Page 57 Thursday, June 9, 2005 9:50 AM