Panasonic WJ-HD200 사용자 설명서
26
● Recording Mode Setup (PROG1-4
SETUP, NO. 1-4)
Parameters for internal timer recording are assigned to
each event (NO. 1-4) of the program (PROG 1-4) in this
menu. There are five recording modes available: super fine
(SF), fine (FQ), normal (NQ), long-time (EX) and optional
(SP). If combined with audio recording (-A), the number of
recording modes doubles. The selected recording mode
determines the remaining recording time displayed on the
monitor.
In the SP mode, the field rate and picture quality are vari-
able and can be selected at option in the range of 0.1 to 30
FPS with five quality level options respectively. After the
recording mode is selected, the available recording time is
determined and displayed.
each event (NO. 1-4) of the program (PROG 1-4) in this
menu. There are five recording modes available: super fine
(SF), fine (FQ), normal (NQ), long-time (EX) and optional
(SP). If combined with audio recording (-A), the number of
recording modes doubles. The selected recording mode
determines the remaining recording time displayed on the
monitor.
In the SP mode, the field rate and picture quality are vari-
able and can be selected at option in the range of 0.1 to 30
FPS with five quality level options respectively. After the
recording mode is selected, the available recording time is
determined and displayed.
Notes:
• For the recording modes other than SP, items suf-
fixed "xxx" in the table will be replaced by a calcu-
lated recording time of 24, 48, 72, 96, 120, 170,
180, 240, 480, 960, 1 200, 1 440, 2 160, 2 880, or
8 640 hours. The selected recording mode with the
preset rate and quality will determine the suffix.
lated recording time of 24, 48, 72, 96, 120, 170,
180, 240, 480, 960, 1 200, 1 440, 2 160, 2 880, or
8 640 hours. The selected recording mode with the
preset rate and quality will determine the suffix.
• Even if preset to 30 or 15 FPS, the actual recording
rate may drop to 7.5 FPS at worst while busy multi-
tasks task such as playback, remote-access play-
back, remote-access live image, FTP access, multi-
split display, or video motion detection are carried
out simultaneously. The status display will indicate
"*PLAY" while playing back the images recorded
with a rate different from the preset.
tasks task such as playback, remote-access play-
back, remote-access live image, FTP access, multi-
split display, or video motion detection are carried
out simultaneously. The status display will indicate
"*PLAY" while playing back the images recorded
with a rate different from the preset.
• Suffix "xxx" following "SP-" is specified in REC
MODE TABLE in the ADDENDUM attached to the
manual.
manual.
1. Move the cursor to MODE, and press the JogDial. The
mode area will be highlighted.
2. Select a recording mode using the JogDial, and press
the Jogdial. Audio data will be recorded when a mode
with hyphen A is selected.
with hyphen A is selected.
Available recording mode: SF, FQ, NQ, EX, SP, SF-A,
FQ-A, NQ-A, EX-A, and SP-A
N/A
Rec Mode
Quality
Audio Record
Note
SF-xxxH
Super Fine
N/A
Field rate, quality
selected optionally
selected optionally
Field rate, quality
selected optionally
selected optionally
N/A
N/A
N/A
Available
Available
Available
Available
Fine
Normal
Long time
Optional setup
Super Fine
Fine
Normal
Long time
FQ-xxxH
NQ-xxxH
EX-xxxH
SP-xxxH
Available
Optional setup
SP-AxxxH
SF-AxxxH
FQ-AxxxH
NQ-AxxxH
EX-AxxxH
3. When SP or SP-A is selected, specify a recording rate
(REC RATE) using the JogDial, and press the JogDial.
Available recording rates: From 0.1 to 30 FPS
4. When SP or SP-A is selected, specify a recording quali-
ty (REC QUALITY) using the JogDial, and press the
JogDial.
JogDial.
Available recording qualities: SUPER FINE, FINE,
NORMAL, EXTENDED
● Alarm Recording Mode Setup (ALM
REC MODE)
Alarm events arising within the time zone specified by the
program will start recording with the preset parameters.
Refer to "PROG NO. SETUP" described above in this menu
for operating procedures and available parameters, since
they are very similar.
program will start recording with the preset parameters.
Refer to "PROG NO. SETUP" described above in this menu
for operating procedures and available parameters, since
they are very similar.
● Pre-alarm Recording (PRE ALM REC)
Picture recording will start prior to the alarm activation at
the time specified by this setting.
the time specified by this setting.
1. Move the cursor to PRE ALARM REC with the [D] or
[C] button.
2. Select the desired pre-recording time with the JogDial,
and press the JogDial.
The default is 0S.
The default is 0S.
Available times (seconds): 0S, 1S, 2S, 3S, 4S, and 5S