Panasonic WV-NP1004 사용자 설명서

18

Each setup item on the [Camera] tab of the "Camera setup" page can be configured using the operation buttons on the cam-
era. The settings relating to image quality, brightness, privacy zone and flange-back length can be configured on the
[Camera] tab of the "Camera setup" page. When using the operation buttons, configure the settings while displaying the
"Camera" tab page on the video monitor.
The following are descriptions about the setup items on the [Camera] tab and of how to configure them using the operation
buttons on the camera.
Refer to the network operating instructions (PDF) for further information about the [Camera] tab.

Configure the settings relating to camera operations

CAMERA ID

The camera title can be edited and displayed on the screen.

ALC/ELC

Select the light control method from "ALC", "ALC+" and "ELC" according to the lens in
use.

SHUTTER

Select the shutter speed.

AGC

Select the method of the gain adjustment.

SENS UP

Adjust the sensitivity.

SYNC

Display the method of the synchronization.

WHITE BAL

Select the method of the white balance adjustment.

DNR

Configure the settings for the DNR (Digital Noise Reduction) function.

BW MODE

Configure the settings relating to the BW mode such as the settings for switching
between the color mode and the BW mode.

PRIVACY ZONE

It is possible to mask a designated zone and as a privacy zone.

EL-ZOOM

Adjust the electronic zoom.

STABILIZER

Select "ON" or "OFF" to determine whether or not to use the image stabilizer to prevent
shaky images.

Select the method of the flange-back length adjustment and adjust the flange-back
length minutely.

CHROMA GAIN

Adjust the chroma level (color density).

AP GAIN

Adjust the aperture level.

PEDESTAL

Adjust the pedestal level (brightness).

HUE

Adjust the chroma phase.

PIX OFF

Correct image defects such as scratches.

CAMERA RESET SETUP

Reset the settings edited on the [Camera] tab to the default settings.

Configure the network settings.