Panasonic WV-NP1004 사용자 설명서

19

The following are descriptions of how to configure each setup item on the [Camera] tab using the operation buttons on the
camera.

The illustrations below are the examples of the [Camera] tab pages to be displayed on a video monitor.

Hold down the [SET] button for around 2 seconds.

→ The top page will be displayed.

Move the cursor onto "END" by press the [UP] or [DOWN]
button.

Press the [SET] button after moving the cursor onto
"SETUP" by pressing the [RIGHT] button.

→ The "DISABLE" indication will change into "ENABLE"

and the settings will become editable.

Move the cursor onto the desired setup item and press the
[SET] button.

→ The setup page of the selected setup item will be dis-

played.

Configure the settings for each item.
Select setup item: Move the cursor by pressing the [Up]

or [Down] button.

Change the parameter: Press the [Left] or [Right] button.
Display the detailed settings page of the setup item:

Press the [SET] button when the setup item with the
[

O] mark is selected.

Go back to the previous page: Move the cursor onto "RET"

and press the [SET] button.

Go back to the top page: Move the cursor onto "TOP" and

press the [SET] button.

To exit from the SETUP menu and display images from the
camera: Move the cursor onto "END" and press the [SET]
button.

• To prevent erroneous operations, the "DISABLE" indica-

tion will always be displayed when the top page is dis-
played. To operate the SETUP menu, switch the "DIS-
ABLE" indication to the "ENABLE" indication first.

• The cursor position will be displayed highlighted.