JVC gr-d850aa 사용자 설명서

MasterPage: Start_Right

Set the Power Switch to “OFF” (

.

Attach the battery pack.

● With the “   ” (arrow) on the battery pack 

pointing at the correct direction, slide the 
battery pack until it locks in place. 

Connect the AC Adapter.

● The POWER/CHARGE lamp on the 

camcorder blinks to indicate charging has 
started.

● When the POWER/CHARGE lamp goes 

out, charging is finished. Unplug the AC 
Adapter from the AC outlet. Disconnect the 
AC Adapter from the camcorder. 

Slide the battery pack while pressing BATT. to 
detach it.

● If a fully charged battery pack is attached to the 

unit, POWER/CHARGE

 

lamp will blink for 

approx. 10 seconds before it turns off.

● If the battery operation time remains extremely 

short even after having been fully charged, the 
battery is worn out and needs to be replaced. 
Please purchase a new one.

● Since the AC Adapter processes electricity 

internally, it becomes warm during use. Be sure 
to use it only in well-ventilated areas.

● After 5 minutes have elapsed in Record-

Standby mode with the cassette inserted, and 
no operation is performed, the camcorder will 
automatically turn off its power supplied from 
the AC Adapter. In this case, the battery charge 
starts if the battery is attached to the 
camcorder.

● Please do not pull or bend the AC Adapter plug 

and cable. This may damage the AC Adapter.  

Perform step 

 in “Charging The Battery 

● Recording time is reduced significantly under 

the following conditions: 
• Zoom or Record-Standby mode is engaged 

repeatedly.

• The playback mode is engaged repeatedly.

● Before extended use, it is recommended that 

you prepare enough battery packs to cover 
3 times the planned shooting time.

BN-VF808U
(Provided)

1 hr. 30 min.

2 hrs.

BN-VF815U

2 hrs. 40 min.

4  hrs. 5 min.

BN-VF823U

3 hrs. 50 min.

6 hrs. 10 min.

   Arrow

GR-D850AA_EN.book  Page 11  Thursday, October 18, 2007  5:26 PM