JVC gr-d850aa 사용자 설명서

MasterPage: Start_Right

During recording, a time code is recorded on 
the tape. This code is to confirm the location of 
the recorded scene on the tape during 
playback. 

1

, 3, & 4, time code begins counting from 

“00:00:00” (minute:second:frame). 
2

, time code continues from the last time 

code number.

If during recording a blank portion is left 
partway through the tape, the time code is 
interrupted. When recording is resumed, the 
time code starts counting up again from 
“00:00:00”. 

To prevent this, perform 

 

 

in the following cases;

● When shooting again after playing back a 

recorded tape.

● When power shuts off during shooting. 

● When a tape is removed and re-inserted during 

shooting.

● When shooting using a partially recorded tape.

● When shooting again after shooting a scene 

then opening/closing the cassette holder cover.

● The time code cannot be reset.

● During fast-forwarding and rewinding, the time 

code indication does not move smoothly.

● The time code is displayed only when “TIME 

CODE” is set to “ON” (

Playback a tape or use Blank Search 

墌 17) to find the spot at which you want to 

start recording, then engage the Still 
Playback mode (

Set the Power Switch to “REC” (

墌 9), then 

start recording. 

Press AUTO button repeatedly to switch to 
auto/manual recording mode. When manual 
mode is selected, the indicator “M” appears 
on the LCD monitor.
Auto Mode : A
You can record using no special effects or 
manual adjustments.
Manual Mode : M
Recording is possible by setting various 
functions manually.

1 2 3 4

GR-D850AA_EN.book  Page 15  Thursday, October 18, 2007  5:26 PM