BMW serie 7 1999 사용자 설명서
165
n
Repairs
Index
Overview
Controls
Car care
Technology
Data
Lamps and bulbs
Turn signals/Parking lamps
(side marker lamps), front
(side marker lamps), front
Dual-filament bulb, 21 watt
1 Remove the assembly cover
2 Insert a Philips-head screwdriver
2 Insert a Philips-head screwdriver
(arrow) all the way in and loosen the
screw (about four turns)
screw (about four turns)
3 Remove the light assembly toward
the front
4 Release and remove the bulb holder
5 Press gently on the bulb, turn it to the
5 Press gently on the bulb, turn it to the
left and remove
6 When you have replaced the bulb,
plug the light into the reliefs on the
headlamp with the tabs. Push the as-
sembly into place and tighten the
screw
headlamp with the tabs. Push the as-
sembly into place and tighten the
screw
7 Secure the assembly cover.
380de100
Side turn signals
5 watt bulb
1 Use a screwdriver to pry out the lamp
at the rear edge
2 Apply gentle pressure to the bulb
while turning it to the left to remove.
Front fog lamps
H3 bulb, 55 watt
1 Use a screwdriver to release the fog
lamp retainer (arrow)
2 Pull the fog lamp out toward the front
3 Release and remove the cover on the
3 Release and remove the cover on the
rear of the lamp assembly
4 Remove the plug
5 Detach the wire clamp
6 Replace the bulb
7 After replacing the bulb, guide the
5 Detach the wire clamp
6 Replace the bulb
7 After replacing the bulb, guide the
lamp assembly back into position.
Continue pressing until you hear the
detent snap into place.
Continue pressing until you hear the
detent snap into place.
380de101
Online Edition for Part-No. 01 41 9 791 187 - © 12/98 BMW AG