BMW serie 7 1999 Manual Do Utilizador

165

Repairs

Index

Overview

Controls

Car care

Technology

Data

Lamps and bulbs

Turn signals/Parking lamps
(side marker lamps), front

Dual-filament bulb, 21 watt

1 Remove the assembly cover
2 Insert a Philips-head screwdriver

(arrow) all the way in and loosen the
screw (about four turns)

3 Remove the light assembly toward

the front

4 Release and remove the bulb holder
5 Press gently on the bulb, turn it to the

left and remove

6 When you have replaced the bulb,

plug the light into the reliefs on the
headlamp with the tabs. Push the as-
sembly into place and tighten the
screw

7 Secure the assembly cover.

380de100

Side turn signals

5 watt bulb

1 Use a screwdriver to pry out the lamp

at the rear edge

2 Apply gentle pressure to the bulb

while turning it to the left to remove.

Front fog lamps

H3 bulb, 55 watt

1 Use a screwdriver to release the fog

lamp retainer (arrow)

2 Pull the fog lamp out toward the front
3 Release and remove the cover on the

rear of the lamp assembly

4 Remove the plug
5 Detach the wire clamp
6 Replace the bulb
7 After replacing the bulb, guide the

lamp assembly back into position.
Continue pressing until you hear the
detent snap into place.

380de101