Yamaha AG-Stomp 사용자 설명서
![Yamaha](https://files.manualsbrain.com/attachments/884c61a284ec9743365c8176528d257dbb7df7e8/common/fit/150/50/873735ee4330929e1549bc72378da029dfa61bac72d66c1f7587e7b724ba/brand_logo.png)
9
Nomenclature
■ Rear Panel
@6 Power Switch (STAND-BY ON/OFF)
This is the unit’s power switch.
* To protect the speakers, always set the OUTPUT knob
!1
to “0” before switching the power ON/OFF.
@7 Power Adaptor Jack (AC IN 12V 1A)
Connect the supplied power adaptor to this jack.
* Never use a power adaptor other than the supplied adaptor.
Use of any other adaptor may result in damage, overheating,
fire, etc.
fire, etc.
@8 Guitar Power Supply Switch
(+9V SUPPLY ON/OFF)
This switch allows the delivery of power (DC9V) to
an electric-acoustic guitar’s built-in pre-amplifier
through the AG-Stomp’s INPUT jack via the sup-
plied TRS phone cable. (
an electric-acoustic guitar’s built-in pre-amplifier
through the AG-Stomp’s INPUT jack via the sup-
plied TRS phone cable. (
→ page 12)
@9 MIDI OUT Jack
This jack is used to transmit MIDI data from the AG-
Stomp such as control changes, program changes,
data in the AG-Stomp’s memory, etc. (
Stomp such as control changes, program changes,
data in the AG-Stomp’s memory, etc. (
→ page 18)
#0 MIDI IN Jack
This jack is used to receive MIDI data from an ex-
ternal MIDI device such as a MIDI Foot Controller,
etc., which can be used select patches, control vol-
ume or control the AG-Stomp’s individual effects.
(
ternal MIDI device such as a MIDI Foot Controller,
etc., which can be used select patches, control vol-
ume or control the AG-Stomp’s individual effects.
(
→ page 18)
Also, AG-Stomp data saved in an external MIDI de-
vice can be returned to the AG-stomp via this jack.
(
vice can be returned to the AG-stomp via this jack.
(
→ page 25)
#1 Digital Output Jack (DIGITAL OUT)
This jack is used to transmit the output of the AG-
Stomp as digital data. Connect this jack to the digi-
tal input jack (COAXIAL) of a digital mixer, etc. (
Stomp as digital data. Connect this jack to the digi-
tal input jack (COAXIAL) of a digital mixer, etc. (
→
page 11)
#2 EXP. PEDAL Jack
Connect a foot controller (expression pedal) (op-
tional) such as the YAMAHA FC-7 to this jack and
control individual parameter’s of the AG-Stomp. (
tional) such as the YAMAHA FC-7 to this jack and
control individual parameter’s of the AG-Stomp. (
→
page 22, 26)
#3 Headphone Jack (PHONES)
Connect a pair of headphones (optional) to this jack
to monitor the AG-Stomp’s sound when you want to
practice privately. (
to monitor the AG-Stomp’s sound when you want to
practice privately. (
→ page 11)
* Even when headphones are connected to this jack, the
audio signal is delivered from the OUTPUT Jack
#4
and
the DIGITAL OUT Jack
#1
.
#4 Output Jacks (OUTPUT R, L/MONO)
These are the AG-Stomp’s analog output jacks (TRS
balanced). Connect these jacks to the input jacks
on a power amp and speaker system, guitar ampli-
fier, mixer, etc.
A commercially available PA type TRS phone cable
can be used to send a TRS balanced audio signal
from the AG-Stomp. Also, the supplied TRS-XLR
converter cables connected to these jacks deliver a
balanced audio signal to the XLR jacks on a mixer,
etc. (
balanced). Connect these jacks to the input jacks
on a power amp and speaker system, guitar ampli-
fier, mixer, etc.
A commercially available PA type TRS phone cable
can be used to send a TRS balanced audio signal
from the AG-Stomp. Also, the supplied TRS-XLR
converter cables connected to these jacks deliver a
balanced audio signal to the XLR jacks on a mixer,
etc. (
→ page 10)
* Use the L/MONO jack when connecting to a monaural de-
vice.
#5 INPUT Jack
#6 Input MUTE Switch
#6 Input MUTE Switch
This is the AG-Stomp’s input jack. Connect a guitar
to this jack.
The supplied TRS phone cable can be used to de-
liver power to an electric-acoustic guitar’s built-in pre-
amplifier from the AG-Stomp. (
to this jack.
The supplied TRS phone cable can be used to de-
liver power to an electric-acoustic guitar’s built-in pre-
amplifier from the AG-Stomp. (
→ page 12)
When pressed, the Input MUTE Switch (
) cuts
the signal from the INPUT jack to prevent noise,
etc. from entering the circuit. Use this switch when
connecting or disconnecting the guitar’s cable.
etc. from entering the circuit. Use this switch when
connecting or disconnecting the guitar’s cable.
@6
@7 @8
@9
#0
#1
#2
#4
#5
#3
#6