Yamaha AG-Stomp 사용자 설명서
10
Connections
■ Connecting a Mixer or Amplifier
1. Use the supplied TRS-XLR converter cable to convert the AG-Stomp’s outputs (balanced TRS) to bal-
anced XLR outputs.
2. Use a commercially available PA type TRS phone cable, to connect the AG-Stomp’s output jack to the
balanced inputs of a mixer, power amplifier, etc.
3. When a monaural phone cable is used, connections will be unbalanced.
To realize the AG-Stomp’s full potential, we recommend using it in stereo.
To the AG-Stomp’s OUTPUT
L/MONO, R Jacks
L/MONO, R Jacks
TRS-XLR Converter
Cable (supplied)
Cable (supplied)
XLR Cable
PA Type TRS Phone Cable
Monaural Phone Cable
Mixer, Power Amplifier, etc.
Balanced XLR Output
Balanced TRS Output
Unbalanced Output
1: Ground
2: Hot
3: Cold
2: Hot
3: Cold
T: Hot
R: Cold
S: Ground
R: Cold
S: Ground
Power Adaptor
AC-10
Electric
Outlet
OFF (
)
Before making any connections to any of the AG-Stomp’s INPUT and/or OUTPUT jacks,
make sure that the power on the AG-Stomp and all other devices is turned OFF to prevent
electrical shock or damage to the devices.
electrical shock or damage to the devices.
■ Connecting the Power
Use the supplied power adaptor (AC-10) to operate the AG-Stomp.
1. Make sure the AG-Stomp’s Power Switch (STAND-BY) is in the OFF
position (
).
2. Connect the power adaptor’s plug to the AC IN jack on the AG-Stomp.
3. Connect the power adaptor to an electric outlet.
Only use the supplied AC-10 power adaptor to power the unit.
The use of any other power adaptor may cause damage, over-
heating or fire, which can be very dangerous.
The use of any other power adaptor may cause damage, over-
heating or fire, which can be very dangerous.
Make sure you use the proper AC voltage as indicated on the
power adaptor.
power adaptor.
Never use the supplied power adaptor AC-10 with any other
device.
device.
* The AC adaptor’s shape will vary
according to the country to which
the device is shipped.
the device is shipped.