Eizo FlexScan L578 사용자 설명서

displayed for a few seconds on the right top corner of the screen.

●     

Adjust brightness of the screen depending on the brightness of your environment. The 
"

on the surrounding brightness.

●     

Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

BrightRegulator function adjusts the brightness of the screen automatically depending on the surrounding 
brightness. The brightness of backlight is adjusted as the sensor on the upper side of the monitor detects the 
surrounding brightness (Default: this function is set "Disable".)

1.  Push the BrightRegulator Button on the contol panel.

2.  The current setting will be appear on the left corner of the screen. During the appearance, pushing the 

BrightRegulator button allows you to change the setting.

  

●     

Do not block the 

 when using this function.

When using the software, ScreenManager Pro for LCD (for Windows), connect the upstream port of the 
monitor to the downstream port of the USB compliant PC or another hub with the USB cable.

After connecting the USB cable, the USB function can be set up automatically. For further details about 
the "ScreenManager Pro for LCD", refer to the readme.txt in the CD-ROM.

 

 

Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin connector on the 
back of the monitor.