Trimble Outdoors r7 사용자 설명서

Trimble R7/R8 GPS Receiver User Guide     3 5

Setting up the Receiver     3

The Trimble R7 receiver should normally be used with a Zephyr or 
Zephyr Geodetic antenna. These antennas have been designed 
specifically for use with the Trimble R7. 

Use Figure 3.14 as a guide for measuring the height of the Zephyr and 
Zephyr Geodetic antennas. The Zephyr antenna is designed to be 
measured to the top of the notch. The Zephyr Geodetic (shown) has 
been designed to be measured to the bottom of the notch.

 

Figure 3.14

Measuring antenna height

Older models of antennas, such as the Choke Ring or 
Micro-Centered™ L1/L2 antennas, need more power to operate than 
the Zephyr models. To configure the receiver to output more power on 
the antenna port, select the correct antenna type in GPS Configurator, 
or through the Trimble controller. For information on how to do this, 
contact your local Trimble Service Provider.

1.520

1.510

1.515

1.505