Epson GT-10000 사용자 설명서
1-20
Setting Up the Scanner
R4C345
Rev. C
Rev. C
A5 size
CHAP1.FM
10/7/99
Pass 0
L
Proof Sign-off:
<tantoname>
<tantoname>
SEI K.Ito M.Fujimori
<leadername>
M.Fujimori
<editorname>
SEI G.Hildebrand
Power-off sequence
Keep the following instructions in mind every time you turn off
your computer and SCSI devices:
your computer and SCSI devices:
❏
When you are finished using your system, turn off your
computer first, then the scanner and other SCSI devices in
reverse order of the power-on sequence.
computer first, then the scanner and other SCSI devices in
reverse order of the power-on sequence.
❏
While using your computer, do not turn off any SCSI device
which has a terminator that is active (on).
which has a terminator that is active (on).
❏
Do not turn the scanner off and back on while using your
computer, otherwise the scanner may not work properly.
computer, otherwise the scanner may not work properly.
Now the hardware connection is complete.
Installing the Scanner Software
To use the scanner, you will need to install the scanner software.
Refer to Chapter 1, "Installing the Software" of the EPSON TWAIN
Pro User's Guide. If you want to use your scanner over a network,
refer also EPSON Scan Server & EPSON TWAIN Pro Network User's
Guide.
Refer to Chapter 1, "Installing the Software" of the EPSON TWAIN
Pro User's Guide. If you want to use your scanner over a network,
refer also EPSON Scan Server & EPSON TWAIN Pro Network User's
Guide.
To use the
a
start button on the scanner in a stand-alone
configuration, remember to install PageManager for EPSON
(hereafter, referred to as "PageManager"). Using PageManager,
you can also change the orientation and the order of scanned
images.
(hereafter, referred to as "PageManager"). Using PageManager,
you can also change the orientation and the order of scanned
images.
For PageManager installation, refer to the EPSON TWAIN Pro
User’s Guide.
User’s Guide.