Epson GT-10000 사용자 설명서
2-2
Using Your Scanner
R4C345
Rev. C
Rev. C
A5 size
CHAP2.FM
10/7/99
Pass 0
L
Proof Sign-off:
<tantoname>
<tantoname>
SEI K.Ito M.Fujimori
<leadername>
M.Fujimori
<editorname>
SEI G.Hildebrand
Scanning Procedure
To scan an image into a graphics software application, the general
procedure is as follows.
procedure is as follows.
1. Turn on the scanner and computer. In a networked
configuration, also turn on the scanner server and start
EPSON Scan Server.
EPSON Scan Server.
2. Start the TWAIN-compliant graphics application.
3. In a stand-alone configuration, start EPSON TWAIN Pro
from the TWAIN-compliant application by selecting a
command such as Acquire. In a networked configuration,
start EPSON TWAIN Pro Network from the TWAIN-
compliant application. Then choose appropriate settings for
the image to be scanned.
command such as Acquire. In a networked configuration,
start EPSON TWAIN Pro Network from the TWAIN-
compliant application. Then choose appropriate settings for
the image to be scanned.
4. Put a document on the document table or a stack of
documents in the Automatic Document Feeder.
5. Start scanning by clicking Scan in the EPSON TWAIN Pro or
EPSON TWAIN Pro Network dialog box. Or you can start
scanning by clicking Start in the EPSON Scan Server dialog
box.
scanning by clicking Start in the EPSON Scan Server dialog
box.
Scanning starts and the scanned image is sent to the destination
software.
software.
When scanning is finished, you can process the image in the target
application.
application.