Allied Telesis AT-8000S 사용자 설명서
Configuring Ports
Aggregating Ports
Page 63
Defining Trunk Settings
The Trunk Settings Page contains parameters for defining Trunks. To define a port trunk:
1.
Click Layer 1 > Port Trunking. The Trunk Settings Page opens:
Figure 37: Trunk Settings Page
The Trunk Settings Page displays information about the currently defined trunks and contains the following fields:
•
Trunk — Displays the trunk name.
•
Description — Displays the user-defined trunk name and/or description.
•
Type — Indicates the type of LAG defined by the first port assigned to the trunk. For example, 100-Copper,
or 100-Fiber.
•
Status — Indicates if the LAG is currently linked. The possible field values are:
–
Up — Indicates the LAG is currently linked, and is forwarding or receiving traffic.
–
Down — Indicates the LAG is not currently linked, and is not forwarding or receiving traffic.
•
Speed — Displays the configured aggregated rate for the trunk. The possible field values are:
–
10 — Indicates the port is currently operating at 10 Mbps.
–
100 — Indicates the port is currently operating at 100 Mbps.
–
1000 — Indicates the port is currently operating at 1000 Mbps.
•
Auto Negotiation — Displays the auto negotiation status of the trunk. Auto negotiation is a protocol between
two link partners that enables a port to advertise its transmission rate, duplex mode, and flow control abilities
to its partner.
to its partner.