Epson emp 800 사용자 설명서

To order an interface board, contact your dealer or call 

EPSON

 

Accessories at (800) 873-7766 (U.S. sales only). In Canada, call 
(800) 873-7766 for dealer referral. 

If you are planning to install the LocalTalk board, you will also 
need two LocalTalk Locking Connector Kits (DIN-8 version). 
Attach one connector box to the AppleTalk interface on the 
printer and the other to the printer port on the Macintosh. 
Then attach the LocalTalk cable between the two connector 
boxes. For more information, see the instructions that came 
with the connector kits.

If you install the Ethernet board connected to a thin coaxial 
(10BASE2) cable, and the printer is the last device on the 
network, you need to obtain a 50-ohm terminator. The 
Ethernet transceiver is included on the 

EPSON

 Ethernet board, 

so you do not need an adapter box for the printer. 

Before you install the serial interface board in your printer, 
follow the instructions that come with the board for setting 
baud rate and parity. Refer to your computer documentation 
for information about matching the board’s settings to your 
computer system. You may also need to set the board’s 
handshake timing, error handling, and other data transfer 
conventions.

easapa.fm5  Page 2  Tuesday, January 14, 1997  9:47 AM