Epson EMP-53 사용자 설명서

When the Indicators Provide No Help

If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem.

No images appear (Nothing at all appears)

• No images appear
• Images are out of focus and distorted (not clear)
• Only part of the image is displayed (Large/small)
• The image colours are not right

• Images appear dark
• Images appear greenish

Images appear purplish

• No sound can be heard
• The remote control does not work
• The power does not turn off

p.70

p.71

p.72

Was the power turned off and then
straight back on again?

After the power is turned off (during

cool-down

), the [Power] buttons on the

projector's control panel and the remote control will not work. Wait until cool-
down has finished. You can then use the [Power] buttons.

p.29

Is sleep mode active?

When sleep mode has been set to "ON", the lamp turns off automatically if no
operations are carried out for 30 minutes while no image signal is being input. The
Power indicator lights orange at this time.
"Setting" - "Sleep Mode"

p.50

Have you pressed the [Power] button?

p.27

Has the image brightness been
adjusted correctly?

"Video" - "Brightness"

p.45

p.47

Is A/V Mute mode active?

p.40

Is the projected image completely
black?

Some input images, such as screen savers, may be completely black.

Is an image signal being input?

If "No-Signal Msg. " in the "Setting" menu has been set to "OFF", no messages
will be displayed. Set it to "Black" or "Blue" for messages to be displayed. If a
message is displayed, refer to the item indicated.
"Setting" - "No-Signal Msg. "

p.50

Try resetting all of the current settings. "Reset All" - "Execute"

p.56

No images appear