EnGenius Technologies durafon 1x 사용자 설명서

~33~

, and 4

base unit.

3. Registration:

a. Press MENU-6 from HS 11 to enter the

registration mode

b. Press and hold the Registration (REG) button on

that additional base unit, which you want to add
into the system) for 2 seconds until 4 LEDs light
up.

c. Press handset key “3”, then enter the base ID i.e.

20 for 2

base, 30 for 3

base, or 40 for 4

base.

this completes the registration process.

Call Transfer

1. While a telephone call is in progress, you can place call on hold and

transfer the call.

Press

HOLD

soft key to put call on hold.

Press

OPTION

soft key to enter feature list for

selection.

4. Three types of transfer method:
a.

Transfer

PBX

(1) When DuraFon 1X is adjunct to the PBX system,

you can transfer the call to an assigned PBX
extension.

(2) Normally, each propritory PBX system acquire a

specific feature code to execute “call transfer”
function

(3) You can pre-program that feature code by

entering the “System” mode (Menu-9); you need
to enter the base ID to link to the base station

(4) Press 3 and then enter the specific “call transfer”

feature code

Un-announced Call Transfer:

Press “END” before the destination handset answers, the call is
automatically transferred to the destination handset.

c. Announced Call Transfer:

You have a
Call on hold

UNHOLD OPTION

1.Transfer PBX
2.UnancdXfer HS
3.AncdXfer HS

System:

ÇÈ

2. Flash
3. Xfter PBX

Main Menu:

ÇÈ

5. Settings
6. Registration

Registration:

ÇÈ

2. Deregister
3. Set base

~34~

(1) Speak to the destination handset.

(2)

Press

XFER

soft key or the END to end announcement. The call is

transferred to the destination handset.

Notes: If the destination handset does not answer after handset
paging timeout, the call is routed back to the originating handset.

Call Manager

“Call Manager” feature allows the handset to be set to receive all incoming,
transferred, and 2-Way/Intercom calls OR just transferred and 2-Way/
Intercom calls. The option is selectable by base 1 to base 4. Besides, this
feature allows you to select a specific base station to make an outgoing call.

1. Decide whether to receive the incoming, transferred,

and 2-Way/Intercom calls from a specific base station:

a. Press menu 8 to enter the Call Manager function.

The screen will display:

b. Press 1 to enter “incoming” setting.

Use

¿ and À Scrolling keys to select a base from

base 1 to base 4.

Then press the

ÆYES NO

key to switch between

Yes and No, then press

SAVE

key to confirm the

setting.

e. Repeat the process until all base stations from

which calls are to be accepted have been
selected for the handset.

2. Decide whether to select a specific base station to make outgoing call:

a. Press menu 8 to enter the Call Manager function.

b. Press 2 to enter “Outgoing” setting.

Use

¿ and À to select either On or Off.

Scroll to On and press

SAVE

if you want to select a

specific base station before you make an
outgoing call. The default setting is Off.

Change System Settings by Administrator

There are four types of system setting that can be adjusted by Administrator.

1. Dial Mode

Receive Calls

From base 1:

ÇÈ

SAVE

ÆYES NO

Main Menu:

ÇÈ

8. Call Manager
9. System

Call Manager:

ÇÈ

1. Incoming
2. Outgoing

Select Base
On

SAVE