EnGenius Technologies durafon 1x 사용자 설명서

~35~

 

a.  Press Menu-9 and enter the two-digit base ID to 

enter the System mode. 

 

b.  Press 1 to enter Tone selection 

 

c.  You can adjust the dial mode between Tone and 

Pulse. The default setting is Tone.  

 

d.  The default setting is Tone.  

2. Flash 

Time 

 

a.  Press Menu-9 and enter the two-digit base ID to 

enter the System mode. 

 

b.  Press 2 to enter Flash selection 

 

c.  You can adjust the flash time from 100ms to 900 

ms (9 levels to choose from.) For example, press 
“2” if the desired flash time is 200ms. You will see 
“DONE” once you finish the setting.   

 

d.  The default setting is 600ms.  

Notes:  If the base station is adjunct to a PBX system, it is 
recommended to adjust the flash time of DuraFon 1X  to match 
the PBX spec.  

3.

Xfter PBX 

 

a.  This function is useful if the base station attached 

to the PBX system through either the analog port 
or the Digital Adaptor. Press Menu-9 and enter the 
two-digit base ID to enter the System mode.  

 

b.  Press 3 to enter Xfter PBX setting mode 

 c. 

Use 

¿or À scrolling key to switch between ON 

and OFF. The default setting is OFF. 

 d. 

Select ON and press 

SAVE

 key 

 

e.  You can key in the specific “call transfer” feature 

code and press OK to confirm the setting. For 
example, if your PBX is N brand, you need to key 
in “Flash”+”*”+”70” as the call transfer code.  

 

f. 

You will see a “DONE” confirmation.  

Notes:  Since the base station is adjunct to a PBX system, you need 
to adjust the flash time of DuraFon 1X  to match the PBX spec and 
then program the “call transfer” code.  

4.  Set next Handset ID to be assigned 
 

a.  This function is useful if you want to assign a 

­ 11             

Flash(msec):   

ÇÈ

1. 100 
2. 200

­ 11             

Done

­ 11             

Xfer PBX:         

ÇÈ

On

SAVE

­ 11             

System:           

ÇÈ

2. Flash Time 
3. Xfter PBX

­ 11             

Xfer Code:        

ÇÈ

Flash*70 

 O K           DELETE

­ 11             

System:           

ÇÈ

3. Xfter PBX 
4. Assign Next

­ 11             

System:           

ÇÈ

1. Dial Mode 
2. Flash Time

­ 11             

Main Menu:      

ÇÈ

8. Call Manager 
9. System

~36~

­ 11             

Main Menu:      

ÇÈ

1. KeyGuard 
2. PhoneBook

­ 11             

ADD

 OPTION 

­ 11             

Number? 

SAVE

 DELETE 

­ 11             

Name?
Caps = * 

SAVE

 DELETE 

designed handset ID to a specific handset. Press 
Menu-9 and enter the two-digit base ID to enter 
the administration mode.  

 

b.  Press 4 and then enter two digits ID number to be 

assigned.  You will see “Saving Configuration” 
and a Done confirmation.  

1. You can store up to 30 entries in the phonebook.  

Each entry can contain a phone number or handset 
ID (up to 28 digits) and a name (up to14 characters). 

   

  

2. To access phonebook, press menu follow by “2” or 

¿or À scrolling key when handset in standby mode. 

   

 

3. To add a new entry: 
 a. Press 

ADD

 soft key. 

  b. Enter a phone number when LCD prompts 

“Number?”  Use 

DELETE

 soft key to delete the 

last digit entered.  Press 

SAVE

 when completed. 

  c.  You will then be prompted to enter a name for the 

phone number just entered.   

   (1) 

Press

SAVE

 key to enter a phone number without 

a name.  All records without naming will be placed 
on top of the list, in the order they are entered. 

 

 

(2)  To enter the name, press the corresponding keypad number one or 

more times according to the order of the character on the key.   

   (3) 

Use

DELETE

 soft key to delete the last character entered.  When 

completed, press 

SAVE

 soft key to confirm your selection. 

­ 11             

Please enter 
Ext. #:** 

CANCEL