Tecumseh oh318ea 사용자 설명서

Page 24

Power Sport Recreational Application Operator’s Manual

181-1269-14

II. Type “E” Air Cleaner

1. Remove wing nuts and air cleaner cover.

2. Remove foam pre-filter from paper filter, if provided,

and inspect for dirt or debris accumulation. If either is
present see "I. Servicing Foam Pre-Filters" instructions
on page 21.

3. Remove paper filter from base and inspect for dirt or

4. Clean inside of base and air cleaner cover thoroughly.

5. Install paper filter into base.

6. Install foam filter onto paper filter.

7. Install air cleaner cover on base.

8. Install wing nuts and tighten securely.

A. At temperatures of 32 F (0 C) and Below

1. Remove wing nuts from air cleaner cover.

2. Remove air cleaner cover from base.

3. Rotate air cleaner cover in “WINTER” position shown.

4. Install air cleaner cover onto base.

NOTE

Be sure air cleaner cover is in correct “WINTER” position
with snowflake symbol visible.
5. Install wing nuts and tighten securely.

B. At temperatures above 32 F (0 C)

1. Remove wing nuts from air cleaner cover.

2. Remove air cleaner cover from base.

3. Rotate air cleaner cover in “SUMMER” position shown.

4. Install air cleaner cover onto base.

NOTE

Be sure air cleaner cover is in correct “SUMMER” position
with sun symbol visible.
5. Install wing nuts and tighten securely.

I. Alternator (Optional)

For alternator related electrical problems such as:

• Inoperative starter
• Discharged battery
• Fuse replacement
• Alternator maintenance/repairs

See your equipment manufacturer’s instructions and an
Authorized Tecumseh Servicing Dealer.

Figure 46. Type “E” Climate Guard Air Cleaner

Assembly

Figure 47. Air Cleaner Cover Positions

Clima

te Gua

1. Wing Nuts
2. Air Cleaner Cover
3. Foam Pre-Filter (Optional)
4. Paper Filter
5. Base

1. Summer Position—above 32 F (0 C)
2. Sun Symbol
3. Winter Position—below 32 F (0 C)
4. Snowflake Symbol