Siemens gigaset s450 ip 사용자 설명서
60
Using several handsets
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / T-NetBox_SAG-registration.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Activating the room monitor and
entering the number to be called
v
¢
í
Add. Features
¢
Room Monitor
¤
Change multiple line input:
Room M.:
Select
On
to activate.
Call to:
Press the display key
§Edit§
and enter des-
tination number.
External number: Select number from
External number: Select number from
the directory or enter directly. Only the
last 4 characters are displayed.
Internal number: Delete any stored
Internal number: Delete any stored
external number.
§INT§
s (select hand-
set or
Call All
, if all registered handsets
are to be called)
§OK§
.
Store number with
Save
.
Level:
Set noise level sensitivity (
Low
or
High
).
¤
Save changes (page 101).
The function is now activated. With
v,
you can move directly to settings.
Changing previously set external
destination number
v
¢
í
Add. Features
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activat-
¤
Save changes (page 101).
Changing previously set internal
destination number
v
¢
í
Add. Features
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
§Yes§
Press the display key to con-
firm the prompt.
¤
Enter number as described in "Activat-
¤
Save changes (page 101).
Caution!
– You should always check the operation
of the room monitor before use. For
example, test its sensitivity. Check the
connection if you are diverting the room
monitor to an outside number.
– When the function is switched on the hand-
set's operating time is severely reduced. If
necessary, place the handset on the base
station. This ensures that the batteries do
not run down.
– Ideally the handset should be positioned 1
to 2 metres away from the baby. The micro-
phone must be directed towards the baby.
– The connection to which the room monitor
is diverted must not be blocked by an acti-
vated answer machine.
Please note:
An external number will be dialled via the set
standard connection (VoIP or fixed network).
If the number is to be dialled via the non-
standard connection, enter a star (*) at the
end of the number.