Siemens HIPATH 3000 사용자 설명서
First Steps and User Configuration
Nur für den internen Gebrauch
A31003-G2540-A100-3-76A9, 04/2003
3-12
optiClient 130 V4.0, User Manual
3benkonf.fm
Logging on
3.4
Logging on
On starting the program, the appropriate configuration data is loaded, and you are presented
with the logon dialog:
with the logon dialog:
When logging on, enter the following data:
>
Confirm your entries with OK.
When the optiClient 130 is started for a phone number that is already known, the parame-
ters saved for that phone number are read in from the profile file. When starting with a
phone number that is unknown, either the default settings in the profile file are used (if
available), or the settings must be configured immediately at logon by clicking on the Ad-
vanced button (see also the section on Extended Options parameters for details).
ters saved for that phone number are read in from the profile file. When starting with a
phone number that is unknown, either the default settings in the profile file are used (if
available), or the settings must be configured immediately at logon by clicking on the Ad-
vanced button (see also the section on Extended Options parameters for details).
Parameter
Meaning
Call number
Client telephone number
Password Appropriate
password
Language
Select the language for the optiClient 130 user interface. Chose
from the languages installed.
from the languages installed.
Remote Access
This option must be activated when Remote Access.
>
The telephone number and the Password are assigned by a systems engineer when
configuring HiPath 3000/5000 V4.0.
The Remote Access option must only be activated if optiClient is logged onto a
HG1500.
configuring HiPath 3000/5000 V4.0.
The Remote Access option must only be activated if optiClient is logged onto a
HG1500.