Hitachi VT-M273A 사용자 설명서

Basic Operations (VCR Plus + Recording) 

 

41

If any channel numbers don't match, follow the steps (page 43) to assign your local 
channel numbers to VCR Plus+ numbers. 

Cable (No Cable Box) 
This is the channel setup to use if your VCR is hooked up directly to cable without a 
cable box. 
Compare your local TV channel listing to your cable company's channel directory to find 
channels that need to be assigned to the VCR Plus+ codes. For example: 

 

In the example above none of the cable channels match, all of them need to be 
assigned to VCR Plus+ channel codes. 

Matching Broadcast CH Numbers to VCR Plus+ Channels 
1. Press GUIDE, then press 4 to select VCR PLUS SETUP. 

You will see the screen as shown below. 

First, the question "Is a cable box being used with the VCR for all channels?" will 
appear when you press 1 to answer "NO", you will then see this screen, as shown 
below. 

 

2. A small arrow points to a blank "--" in the CHANNEL column. If your broadcast 
channel number is the same as the VCR Plus+ channel in your TV listing, do not enter 
any number. Press CHANNEL up or down to position a nonmatching station next to the 
arrow. 
3. If your broadcast channel number is not the same as the VCR Plus+ channel in your 
TV listing, use the number buttons to assign the broadcast channel to the corresponding 
VCR Plus+ channel. 
In the example below broadcast channel #38 is assigned to VCR Plus+ channel #42.