Hitachi VT-M273A 사용자 설명서

Basic Operations (VCR Plus + Recording) 

 

43

being used with the VCR for all channels?" You do not receive all channels through the 
cable box.) 
2. When you come to one of the channels that you receive through the cable box, enter 
the cable box's output channel number (03 to 04). This will assigne the scrambled cable 
channels. 

For example, suppose you receive Home Box Office (HBO) through the cable box. Its 
cable channel is 2 and its VCR Plus+ channel code is 33. Your cable box output 
channel is 4. You would assign HBO like this: 

 

3. Press GUIDE to end the setup procedure. 
4. You are ready to begin timed recording with VCR Plus+. But you will need to use the 
A-or-B switchbox to select whether you will record from the unscrambled or scrambled 
channels. 

Now that your channels are set up, you can take advantage of this quick and easy 
method of delayed recording. You will use the on-screen Easy Guide System, following 
the basic procedure for delayed recording outlined on page 37. See the section on 
Recording a Program for recording tips and programming priorities.  
You set up the delayed recording using the on-screen Easy Guide System. 
1. Press GUIDE, then press 1 to select VCR PLUS RECORDING and bring up this 
screen: 

 

2. Use the number buttons to enter the PlusCode of the program you want to record. 
This code can be up to eight digits. Do not enter a zero at the beginning of a code -- the 
VCR will not accept it. If you enter a wrong digit, press CLEAR and enter the correct 
one. 
3. If you accidentally enter a nonexistent PlusCode, the VCR gives you an error 
message that disappears from the screen in about 10 seconds.