Patton electronic smartnode 4110 사용자 설명서

Model 4520 & 4110 Series Getting Started Guide

SmartNode Series VoIP routers overview

Figure 3. SmartNode 4520 Series power input connectors

Ports descriptions
The SmartNode 4520 Series rear panel ports are described in 

Table 3. Rear panel ports 

10/100 Ethernet
ETH 0/0 & ETH 0/1

Rear panel RJ-45 connectors (see 

 on page 17) that connect the router to an Ether-

net device (e.g., a cable or DSL modem, LAN hub or switch).

Voice Ports, FXS 

Rear panel FXS RJ-11/12 connectors (see 

with an FXO port (a telephone for example). EuroPOTS support (ETSI 
EG201 188). Configured per model as follows:

•

SmartNode 4522—0/0, 0/1

•

SmartNode 4524—0/0, 0/1, 0/2, 0/3

•

SmartNode 4526—0/0, 0/1, 0/2, 0/3, 0/4, 0/5

•

SmartNode 4528—0/0, 0/1, 0/2, 0/3, 0/4, 0/5, 0/6, 0/7

Power

Rear panel The gateway is available in a DC or AC power input version (see 

•

AC version (Internal power supply): 100–240 VAC, 50/60 Hz

•

AC version (External power supply): 100–240 VAC, 50/60 Hz

•

DC version: 12 VDC 

Console

Front panel Used for service and maintenance, the Console port (see 

an RS-232 RJ-45 connector, connects the router to a serial terminal such as a PC 
or ASCII terminal (also called a dumb terminal).