Polycom RSS 2000 사용자 설명서

다운로드
페이지 36
RSS 2000 Policies and Limitations 
 
 
 
23 
RSS 2000 Policies and Limitations 
Table 8 
Policies and Limitations 
Subject 
Description 
H.323 Alias length 
The maximum length of the system H.323 alias name is 16 characters. 
Console Service 
RS232 configuration: Baud rate 9600, Data bits 8, Parity None, Stop 
bits 1, Flow control OFF. 
ONLY ONE connection to the Console service is allowed at any time, 
either by RS232 or by Telnet, but not both. 
Endpoint menu 
ƒ 
When scheduling a dial out & record from the Web UI, RSS will 
loopback the video and NEVER show the menu unless a menu 
operation command (FECC arrow keys or DTMF 2/4/6/8) is given 
from the endpoint. 
ƒ 
When a pre-defined endpoint dials into the RSS and the endpoint has 
the "immediate recording" option, RSS will never show the menu 
unless a menu operation command is given. 
ƒ 
When inviting an endpoint to a P2P recording room (using E.164 
number of the P2P room followed by # or * and E.164 number of the 
invited endpoint), the inviting endpoint will view menu and the invited 
endpoint will not view the menu. 
ƒ 
When two endpoints meet at a P2P recording room, only one of them 
can view the menu at a time. 
P2P recording 
maximum bandwidth 
Maximum bandwidth for a P2P recording room is 1024K. If video 
protocol for P2P recording room is H.264, then the maximum 
bandwidth is 768K. 
Archive file size 
If the media file size exceeds 4GB, downloads from Web UI may be 
incomplete.  
Media Player 
Support  
Windows Media Player 9 or above is required.. 
RealPlayer can also be used if WMP is properly installed. 
QuickTime player is not supported. 
Some third party media player such as Media Player Classic (MPC) 
and VLC can also be used, but they were not tested and are not 
supported. 
Archive playback 
Archive playback with WMP does not support playback controls: 
Pause/Resume/FF/Backward, etc 
H.323 playback 
During H.323 playback, if there is packet loss and the endpoint 
requests an I-Frame, RSS cannot honor the request because all 
audio/video data are from the media file with I-Frames already set.  
System Reset 
Hard reset (power off and on) is not recommended.  
Reset should be done via the Web UI or Console service whenever 
possible. 
LDAP integration 
Only Microsoft Active Directory is supported.