Polycom RSS 2000 사용자 설명서
RSS 2000 Getting Started Guide & Release Notes – Version 3.0.2
24
Subject
Description
H.323 preview
Only two H323 devices can utilize archive Preview. This means when
there are 2 endpoints previewing on RSS 2000, the third endpoint to
connect to RSS 2000 will not receive preview. Even if the two
endpoints stop receiving preview or disconnect the third endpoint still
cannot receive preview images until it re-connects to the RSS.
there are 2 endpoints previewing on RSS 2000, the third endpoint to
connect to RSS 2000 will not receive preview. Even if the two
endpoints stop receiving preview or disconnect the third endpoint still
cannot receive preview images until it re-connects to the RSS.
HD and SD archives cannot be previewed.
No Transcoding for Preview. This means that an archive recorded in
H263 will not be able to be previewed by an endpoint connected in
H264 and vice versa. However, if the endpoint supports both H264
and H263, archive preview will be available.
H263 will not be able to be previewed by an endpoint connected in
H264 and vice versa. However, if the endpoint supports both H264
and H263, archive preview will be available.
In a clustered configuration, H.323 endpoint cannot receive a preview
image of an archive that is not stored on the RSS unit that the
endpoint is directly connected to.
image of an archive that is not stored on the RSS unit that the
endpoint is directly connected to.
Archive Converter
When using the RSS 2000ArchiveConverter, the transcoded file loaded
back to the RSS will be limited to 20 FPS.
back to the RSS will be limited to 20 FPS.
When working with a gatekeeper in routed mode, devices that are
trying to call to the RSS using its IP address instead of its E.164 alias
will be rejected if they are not registered to the same gatekeeper as the
RSS.
trying to call to the RSS using its IP address instead of its E.164 alias
will be rejected if they are not registered to the same gatekeeper as the
RSS.
This is the right policy when working with routed mode on the GK
MGC Integration
When working with the MGC in Video switching mode – the RSS will
indicate High Definition recording is occurring.
indicate High Definition recording is occurring.
You can disable HD or define the minimum rate for HD in the single
point recording setting of the RSS, or as alternative disable HD in
system.cfg of the MGC.
point recording setting of the RSS, or as alternative disable HD in
system.cfg of the MGC.
HDX Interoperability
Playback of H263 recordings by HDX endpoints may result in some
video artifacts.
video artifacts.
Clustering
Only archives with viewing rights configured for “Allow All”, can be
shared using clustering.
shared using clustering.
When clustering, archives that are not saved on the RSS 2000 being
directly managed, can not be deleted or have their properties
modified.
directly managed, can not be deleted or have their properties
modified.
Hunting
Each RSS 2000 is capable of 2 recording and 8 H323 playbacks (total
of 10 H323 Connections).
of 10 H323 Connections).
When using the RSS Hunting function with Cisco GK, the GK will
hunt to the next available RSS after the RSS is full with 10 H323
connections.
hunt to the next available RSS after the RSS is full with 10 H323
connections.
Hunting is only supported with PathNavigator/SE2000, RADVISION
GK, and Cisco GK .
GK, and Cisco GK .
Streaming without
recording cannot
pause.
recording cannot
pause.
When using the Streaming Without Recording function, pause is not
available. The stream can only be stopped.
available. The stream can only be stopped.
V3.0 upgrade
V3.0 has 2 separate upgrade packages. The language features can not
be included in a single package, part 1 includes all basic functions, and
part 2 includes additional languages. Some users will need to upload 2
packages to achieve the required language functionality. For details,
please read the version 3 User Guide.
be included in a single package, part 1 includes all basic functions, and
part 2 includes additional languages. Some users will need to upload 2
packages to achieve the required language functionality. For details,
please read the version 3 User Guide.