Pelco SD5AM 사용자 설명서

20

Pelco Manual C2419M-A (5/00)

Main Menu

<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT

Other Menu

Auto flip

On

Proportional pan

On

Limit stops

On

Park time minutes

0

Scan speed deg/s

25

Pattern length

6 min

Exit

There are two proportional pan modes:

On - Enables the proportional pan mode. The amount of zoom controls the pan and

tilt. At telephoto zoom settings, the pan and tilt speeds will be slower for a given
amount of joystick deflection than at wide zoom settings. This keeps the image
from moving too fast on the monitor when there is a large amount of zoom.

Off - Disables proportional pan mode. The pan speed will not depend on the amount

of zoom.

To change the proportional pan mode:
1.

Program preset 95 (28). The main menu appears.

2.

Position the cursor (>) beside Other.

3.

Press the Iris Open button to enter the Other menu.

4.

Position the cursor (>) beside Proportional Pan.

5.

Press the Iris Open button. The cursor moves to the right, beside the word On or Off.

6.

Move the joystick up or down to toggle between On and Off.

7.

SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.

3.

Press the Iris Open button to enter the Power Up Mode menu.

4.

Press the Iris Open button to move the cursor to the right.

5.

Move the joystick up or down to cycle through the selections. Stop on the item you
want to select.

6.

SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.