Pelco SD5AM 사용자 설명서
22
Pelco Manual C2419M-A (5/00)
SCAN SPEED
Next Menu
LowLight limit
2
Shutter speed
Auto
Auto focus mode
Auto
<Sharpness>
<White balance>
Prev (back to prev. menu)
Exit
<White balance>
Prev (back to prev. menu)
Exit
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Camera Menu
Backlight comp
Off
Zoom limit
x- -
Reset camera
<Gain/AGC>
<Auto-iris>
<Next>
Exit
<Gain/AGC>
<Auto-iris>
<Next>
Exit
Other Menu
Auto flip
On
Proportional pan
On
Limit stops
On
Park time minutes
0
Scan speed deg/s
25
Pattern length
6 min
Exit
The scan speed is adjustable from 1-40 degrees per second. This occurs in three scan
modes: auto, random, and frame scan.
modes: auto, random, and frame scan.
To change the scan speed:
1.
1.
Program preset 95 (28). The main menu appears.
2.
Position the cursor (>) beside Other.
3.
Press the Iris Open button to enter the Other menu.
4.
Position the cursor (>) beside Scan Speed deg/s.
5.
Press the Iris Open button. The cursor moves to the right, beside the number of degrees.
6.
Move the joystick up or down to toggle through the number of degrees (1-40) until you
reach the number you want. (If set on a low number, the scan will appear to barely
move but is still functioning.)
reach the number you want. (If set on a low number, the scan will appear to barely
move but is still functioning.)
7.
SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.
CANCEL - Press the Iris Close button if you do not want to change the setting.
SHARPNESS
Sharpness Menu
Auto Sharpness
On
Sharpness
13
Exit
The following modes are available for adjusting the sharpness of the picture:
Auto Sharpness
Sharpness (manual)
Sharpness (manual)
To change the mode:
1.
1.
Program preset 95 (28). The main menu appears.
2.
Position the cursor (>) beside Camera.
3.
Press the Iris Open button to enter the Camera menu.
4.
Position the cursor (>) beside Next.
5.
Press the Iris Open button to go to the Next menu.
6.
Position the cursor (>) beside Sharpness.
7.
Press the Iris Open button. The Sharpness menu opens.
8.
Position the cursor (>) beside one of the choices. Press the Iris Open button.
AUTO SHARPNESS - The cursor moves to one of two choices: On or Off. Move
the joysitck up or down to toggle between them. Press the Iris Open button to select
the choice, or press the Iris Close button if you do not want to change the setting.
the joysitck up or down to toggle between them. Press the Iris Open button to select
the choice, or press the Iris Close button if you do not want to change the setting.
SHARPNESS - The cursor moves to a numeric value. Move the joystick up or down
to a value. As you change the value, you will see the sharpness change. Press the Iris
Open button to select the value, or press the Iris Close button if you do not want to
change the setting. If the Auto Sharpness is on, it changes to off when you select a
new value.
to a value. As you change the value, you will see the sharpness change. Press the Iris
Open button to select the value, or press the Iris Close button if you do not want to
change the setting. If the Auto Sharpness is on, it changes to off when you select a
new value.