Zenith 12 사용자 설명서
The Self Timer [7j provides about a seven second delay in
the firing of the shutter and enables you to get into the
picture yourself. Flash can be used.
the firing of the shutter and enables you to get into the
picture yourself. Flash can be used.
Place camera preferably on a tripod, otherwise on a firm
surface.
surface.
Set speed and aperture. Frame area In Viewfinder [27j and
focus. Cock Shutter by advancing Film Transport Lever [2]
in short strokes until it stops.
focus. Cock Shutter by advancing Film Transport Lever [2]
in short strokes until it stops.
Depress Shutter Release button [3] halfway until lens closes
down and turn it fully clockwise to the "V" position.
down and turn it fully clockwise to the "V" position.
IMPORTANT- Do not leave the Shutter Release locked in the
'V' position longer than necessary in order to minimize
battery drain.
Turn the Self-Timer Lever [8] down until it will go no
further. The "V" that is revealed is just a reminder that you
should have set the Release Button [3] to its "V" position.
further. The "V" that is revealed is just a reminder that you
should have set the Release Button [3] to its "V" position.
Press the Self-Timer Release Button p1 and move into the
picture area as quickly as possible. The Lever [8] will slowly
return firing the shutter during its travel.
picture area as quickly as possible. The Lever [8] will slowly
return firing the shutter during its travel.