Maytag w10577942b 사용자 설명서

Delay Wash
  If a Delay Wash is set, the Delay Wash indicator will light and 

the delay time will count down in the display. 

Door Locked
  Door Locked will light to indicate that the door is locked and 

cannot be opened without first pausing or canceling the cycle. 

Add Garment
  When “Add Garment” is lit, you may pause the washer, open 

the door, and add items.

Done
  Once the cycle is complete, this light will come on. Remove 

the load promptly for best results. 

 

Efficiency Monitor
  The Efficiency Monitor allows you to see how the settings  

you select affect your energy savings. To use the Efficiency 

Monitor, choose the best cycle, temperature, spin speed, and 

options for the fabrics being washed. The Efficiency Monitor 

will rate the water and energy use of those selections, from 

Good to Best. You can then adjust the settings and options  

to decrease the amount of energy used within that cycle. 

Lift the selector to the high 

position.

Push down the selector to 

the low position.

Pour a measured amount of HE 

detergent into detergent compartment. 

For powdered detergent, lift the selector 

to the high position. For liquid detergent, 

push down the selector to the low 

position.
Do not overfill; adding too much 

detergent may cause detergent to be 

dispensed into the washer too early. 

IMPORTANT: 

n

  Do not add single-dose laundry packet to dispenser 

drawer. 

n

  Use powdered detergent when using the Delay Wash 

option. Liquid detergent may seep out before the wash 

begins.

HE detergent  

compartment

1.  Open the dispenser drawer.
2.  Add laundry products as described in steps 4–6 in the “Using 

Your Washer” section.

3.  Slowly close the dispenser drawer. Make sure it is  

completely closed.  

NOTE: A small amount of water may remain in the dispensers 

from the previous wash cycle. This is normal.

Selector

Selector 

in high 

position

Selector 

in low 

position

Use only High Efficiency detergents. The package will be marked 

“HE” or “High Efficiency.” Low-water washing creates excessive 

sudsing with a non-HE detergent. Using non-HE detergent 

will likely result in longer cycle times and reduced rinsing 

performance. It may also result in component failure and, over 

time, buildup of mold or mildew. HE detergents are low-sudsing 

and quick-dispersing to produce the right amount of suds for 

the best performance. They hold soil in suspension so it is not 

re-deposited onto clean clothes. Follow the manufacturer’s 

instructions to determine the amount of detergent to use.