Mitsubishi Electronics dx-tl4709u 사용자 설명서

14

This function is used to control the cameras connected via 
RS-232C or RS-422/485 terminal.

Go to PTZ Control

Zoom, iris, focus adjustment, AutoPan

Preset

Select PTZ Camera

User Menu

1.  Pan or tilt the PTZ camera connected.

•  Click the gray area by using the mouse to adjust 

the camera angle.

adjusts the camera angle 

in the upward direction

adjusts the 

camera angle 

in the rightward 

direction

adjusts the 

camera angle 

in the leftward 

direction

adjusts the camera angle 

in the downward direction

2.  Adjust zoom, iris, and focus. And activate auto pan.

3.  Preset the viewing points 1 to 16.

•  The preset points are registered to the PTZ 

camera for auto pan function.

4.  Switch the camera number to be controlled.

•  The camera number to be controlled appears on 

the LCD display on the front panel.

 

01-01-2006 00:00:00
PTZ CAM1

 <PTZ Control> can be set using the mouse only. You can-

not set it using front panel buttons.

1.  Press the camera number button of the PTZ camera 

number to be controlled and display the picture in 
the single screen display.

2.  Press the PTZ button.

•  The unit switches to PTZ mode and the button 

lights up. “PTZ” appears on the LCD display on 
the front panel during PTZ mode.

 

01-01-2006 00:00:00
PTZ

•  The camera number to be controlled appears on 

the LCD display on the front panel.

 

01-01-2006 00:00:00
PTZ CAM1

3.  Control the camera.

Tilt: Press the TILT   button to tilt the camera in 
the upward direction. Press the TILT   button to 
tilt the camera in the downward direction.

 

Pan: Turn the SHUTTLE ring to the right to pan 
the camera in the rightward direction. Turn the 
SHUTTLE ring to the left to pan the camera in the 
leftward direction.

zoom: Press the CAMERA ZOOM button 

and then turn the JOG dial to the left (wide) or 
right (tele) to adjust the camera zoom.

Press the FOCUS button and then turn the 

JOG dial to the left (far) or right (near) to adjust the 
focus of a camera.

 

Iris: Press the IRIS button and then turn the JOG 
dial to the left (close) or right (open) to adjust the 
iris of a camera.

 

Preset: Press the PRESET button and then press 
the number buttons within 3 seconds to preset the 
viewing points. Up to 16 points can be set.

 

Auto pan: Press the AUTO PAN button to activate 
the auto pan function of the camera.

 During PTZ operation using front panel buttons, POWER 

button and functions related to playback do not work. Fur-
thermore, menus cannot be displayed.