Mitsubishi Electronics dx-tl4709u 사용자 설명서

15

Basic operations

This function is to setup the recording parameters of 
recording setting pattern A to start recording manually. Ensure 
all the cameras are connected and time and date has been 
set correctly.  Before you start recording, check the repeat 
recording settings in the <Data Management Setting for Main 
Memory> (System Menu   Memory) fi rst, and then make the 
recording settings.

 Make the manual recording settings on the <Set 

Recording Pattern A (Normal/Timer)>.

 <Set Recording Pattern A (Normal/Timer)> can be used 

for manual or timer recording. <Set Recording Pattern B 
(Timer)> to <Set Recording Pattern D (Timer)> are used 
for timer recording only.

 Settings here are for manual recording only. For timer 

recording, settings must be made on the <Timer> menu.

Set Recording Pattern A (Normal/Timer)

Camera Check

Recording Setting A-Normal(Auto)

Recording Setting A-Normal(Easy)

Recording Setting A-Normal(Manual)

Recording Setting A-Normal

Recording Setting A-Normal

Setup Menu

Recording Setting A-Normal

1.  Execute camera check.

•  The unit automatically detects the cameras 

with video signal at their input when you select 
“Execute.” The detected cameras are used in 
the Auto and Easy settings calculation in step 2.

 After executing the camera check, the recording settings 

are made only for the camera numbers with the video 
signal input when using auto or easy setting.

2.  Set the normal recording menu.

 Auto: Automatically sets the picture grade and 

the recording rate by setting the recording cycle 
and the recording hour per day. Set the desired 
settings and then select “Execute.”
•  The preview screen appears automatically when 

the auto setting is executed.

 Easy: Sets the frame or fi eld recording, recording 

rate, and picture grade for normal recording to 
the same settings for all the cameras. When the 
recording rate is set to “– – –” for all the camera 
numbers, normal recording does not perform.  Set 
the desired settings and then select “Execute.”
•  The preview screen appears automatically when 

the easy setting is executed.

 Manual: Sets per camera, the frame or field 

recording, recording rate, and picture grade for 
normal recording. When you set “– – –” for the 
recording rate, the recording does not perform for 
that camera number.
•  Select “View” to display the preview screen and 

check your settings.

 When you set frame recording, the recording rate display 

in the preview screen turns green.

 The recording rate display turns red when the value 

exceeds 240 pps in total.

<Estimated Recording Time>
•  The estimated continuous recordable time is displayed 

on the bottom of the preview screen which is dependent 
on the picture grade and the recording rate settings 
for normal recording. (The time does not reflect alarm 
recording settings.)

•  When the main device is partitioned, <Estimated 

Recording Time> shows the estimated recordable time for 
normal recording.

3.  Press the REC/STOP button.

•  The REC/STOP button lights up and recording 

starts.

4.  To stop recording, press the REC/STOP button for 

more than 2 seconds.
•  Recording stops and the light turns off.

REC/STOP