Omega OMB-DAQBOARD-3000 사용자 설명서

 
 

For DB37 P1 applications you can attach a DBK11A to the device via a CA-37 cable. 

 

 

(100-pin)  For 100-pin P4 connector applications you can use a DBK200 (or DBK201), DBK11A, and 

a CA-195 cable; or you could use a DBK213 and a CA-195 cable.  Illustrations of these two 
scenarios follow. 

 

Connecting a DBK11A via a DBK200 

 

 

Connecting a DBK213 

* There are several DBK200 Series adaptive boards and modules available for 100-pin P4 

connector applications.  Refer to your hardware documentation or DBK Options Manual 
for specific information.  PDF versions of documents are included on the data acquisition 
CD and on our web site. 

 
 

(68-pin) 

 

 

Connecting a TB-100 

 

For 68-pin SCSI (P5) connector applications you can use a CA-G56 cable to attach a 
passive TB-100 screw-terminal connector option.  CA-G55 or CA-G56-6 can be substituted 
for the CA-G56 cable.** 

Note that in place of the TB-100, a DBK215 Module could be used.  Refer to your hardware 
documentation or DBK Options Manual for specific information.  PDF versions of 
documents are included on the data acquisition CD and on our web site. 

** CA-G56 is a 3 ft. shielded cable;  CA-G55, a 3 ft. unshielded cable; CA-G56-6, a 6 ft. shielded cable. 

 

pg. iv_DaqCal 

918494

 

User Calibration Guide, 457-0931 rev 1.0