Omega OMB-DAQBOARD-3000 사용자 설명서
After you have completed the setup according to the type of device and appropriate connectivity option,
launch DaqCal and follow the on-screen instructions.
launch DaqCal and follow the on-screen instructions.
What to Expect when using DaqCal
When DaqCal opens you will be prompted to select your device from a list. After doing so the application
will guide you through the calibration process using simple on-screen instructions. It is important that you
select the correct device as the steps required usually differ from one device to another.
will guide you through the calibration process using simple on-screen instructions. It is important that you
select the correct device as the steps required usually differ from one device to another.
The following text and illustrations are shown for illustrative purposes only.
This material is not to be substituted for actual DaqCal procedures.
This material is not to be substituted for actual DaqCal procedures.
After launching DaqCal, select the device to be calibrated from the device inventory list.
Selecting the Device from Device Inventory
After selecting your device, click the <OK> button. An instruction screen with a Calibration List will
display. See following figure.
display. See following figure.
Initial Calibration Instruction Screen
User Calibration Guide, 457-0931 rev 1.0
918494
DaqCal_pg.
v